Product Description
This kit is perfect for customers who are building a cocktail arcade machine as the wires in this kit are 1 Metre long. The I-PAC2 board has 32 inputs, making it an ideal way to connect your 2 player set-up to a PC. The included Metre long wires make connecting simple.
PLEASE NOTE: Actual colours of wires in the kit may vary, depending on current stock.
Connect the crimped end of the Metre long wires to the NO (Normally Open) microswitch tags on your joysticks and buttons, strip a small section of the rubber off the other end of the wires and screw these into the corresponding terminals on the board. Then all that is left to do is connect the daisy chain ground harness to the COM (Common Ground) microswitch tags on your joysticks and buttons.
If you have any spare ground connections, you can either cut these off, or use them as span to help the daisy chain reach the ground terminal on the I-PAC2 board. Once this is complete, plug your board into your PC and once it has been recognized, you are ready to go.
Crimp sizes:
2.8mm - This size crimp is mainly used for Sanwa & Seimitsu buttons.
4.8mm - This size crimp is mainly used for standard arcade buttons E.g. Happ, IL & Classic buttons
4.8mm/2.8mm - This option allows you to use standard joysticks (Happ, IL etc...) with Japanese buttons (Sanwa or Seimitsu)
6.3mm - This size crimp is mainly used for microswitches that have the larger 6.3mm terminals.
What's included with the 2.8mm - 4.8mm - 6.3mm options?
1 x I-PAC 2 FS32 Keyboard Encoder
1 x Pack Of 4 PCB Feet
1 x Insulated Daisy Chain Harness With 32 Crimp Connections
32 x 1 Metre Long Insulated Crimped Wires
What's included with the 4.8mm/2.8mm option?
1 x I-PAC 2 FS32 Keyboard Encoder
1 x Pack Of 4 PCB Feet
2 x Insulated Daisy Chain Harness With 32 Crimp Connections
(1 x 2.8mm daisy chain & 1 x 4.8mm daisy chain)
32 x 1 Metre Long Insulated Crimped Wires
(24 x 2.8mm wires & 8 x 4.8mm wires)