null

Discount Codes | 10% Off £100 - AWUK10 | 5% Off £50 - AWUK5

Shop by Category

Wires & Cables

We stock a range of wires and cables, which are suitable for various arcade machine projects, commercial use and academic projects. We offer worldwide shipping for our wires and cables and various shipping options are available at the time of order.

We hope you enjoy browsing our selection of wires and cables . If you are not sure which wires to buy or you need more help on selecting the correct wires, feel free to contact us by email or phone and we will be more than happy to offer you some friendly help and advice on choosing the right wires and cables for your project.

  • Single 1 Metre Long Insulated 4.8mm Crimped Wire

    Single 1 Metre Long Insulated 4.8mm Crimped Wire

    This 1 metre long pre-crimped wire has a 4.8mm insulated female spade connector at one end and is bare at the other end. This 4.8mm crimped wire is the most common size and is suitable for connecting to all microswitches with 4.8mm terminals. This wire...

    £0.32 inc. VAT
    £0.27 ex. VAT
    Choose Options
  • Single 1 Metre Long Insulated 2.8mm Crimped Wire

    Single 1 Metre Long Insulated 2.8mm Crimped Wire

    This 1 metre long pre-crimped wire has a 2.8mm insulated female spade connector at one end and is bare at the other end. This 2.8mm crimped wire is most commonly used for connecting to Sanwa buttons, Seimitsu buttons, Gold Leaf buttons and all...

    £0.32 inc. VAT
    £0.27 ex. VAT
    Choose Options
  • Insulated Daisy Chain Harness With 32 Crimp Connections

    Insulated Daisy Chain Harness With 32 Crimp Connections

    This daisy chain harness features 32 x female spade connectors with insulated covers in one continuous length and is commonly used for wiring ground connections for the microswitches on arcade buttons or for connecting to the bulb holders on illuminated...

    £4.50 inc. VAT
    £3.75 ex. VAT
    Choose Options
  • Replacement 2 Wire Harness For Zero Delay USB Board

    Replacement 2 Wire Harness For Zero Delay USB Board

    Each 2 wire harness is approx 7.5 Inches long and is available to order in 2 different sizes: 2.8mm or 4.8mm crimp connectors and is compatible with the hardware for Zero Delay PCB. Each 2 wire harness includes 1 x crimped wire for signal and 1 x crimped...

    £0.90 inc. VAT
    £0.75 ex. VAT
    Choose Options
  • Single 1 Metre Long Insulated 6.3mm Crimped Wire

    Single 1 Metre Long Insulated 6.3mm Crimped Wire

    This 1 metre long pre-crimped wire has a 6.3mm insulated female spade connector at one end and is bare at the other end. This 6.3mm crimped wire is most commonly used for connecting to any microswitch with 6.3mm terminals, which are usually found on...

    £0.32 inc. VAT
    £0.27 ex. VAT
    Choose Options
  • JST-XH Female To Female Connector Cable JST-XH Female To Female Connector Cable

    JST-XH Female To Female Connector Cable

    This LONG JST-XH female to female connector cable is approx 50cm in length and features a 5 pin female plastic header at each end. This cable can be used for connecting to various PCB projects. The JST-XH cable can be used for connecting to the TP-MA on...

    £2.10 inc. VAT
    £1.75 ex. VAT
    Add to Cart
  • On/Off 240V Inlet Switch Socket On/Off 240V Inlet Switch Socket

    On/Off 240V Inlet Switch Socket

    This On/Off 240V inlet switch socket with fuse is ideal for various arcade cabinet projects, including bar top arcade cabinet kit builds. Outer Product Dimensions:Front Dimension: 59mm x 49mmDimensions For Mounting:Distance between screw holes: 40mmRear...

    £2.70 inc. VAT
    £2.25 ex. VAT
    Add to Cart
  • I-PAC 2 And Wiring Kit

    I-PAC 2 And Wiring Kit

    This kit is perfect for customers who are building a cocktail arcade machine as the wires in this kit are 1 Metre long. The I-PAC2 board has 32 inputs, making it an ideal way to connect your 2 player set-up to a PC. The included Metre long wires make...

    £46.79 - £49.79 inc. VAT
    £38.99 - £41.49 ex. VAT
    Choose Options
  • Crown Conversion Harness

    Crown Conversion Harness

    The Crown conversion harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and...

    £5.99 inc. VAT
    £4.99 ex. VAT
    Add to Cart
  • Sanwa JLF-H 5 Pin Cable

    Sanwa JLF-H 5 Pin Cable

    The Sanwa JLF-H is the cable used to connect the Sanwa JLF series of joysticks, including JLF-TP-8Y, JLF-TP-8YT and JLF-TP-8S. This cable just pushes on to the 5 pins on the JLF-TP-8YT joystick PCB. Snap-on connector and official Sanwa colouring scheme...

    £2.39 inc. VAT
    £1.99 ex. VAT
    Add to Cart
  • Replacement 3 Wire LED Harness For Zero Delay USB Board

    Replacement 3 Wire LED Harness For Zero Delay USB Board

    This 3 wire harness is available to order in 2 different sizes: 2.8mm or 4.8/6.3mm crimp connectors and is compatible with the hardware for Zero Delay LED PCB only. Each 3 wire harness includes 1 x crimped wire for microswitch signal, 1 x crimped wire...

    £0.90 inc. VAT
    £0.75 ex. VAT
    Choose Options
  • Power Cable with UK Plug Power Cable with UK Plug

    Power Cable with UK Plug

    This power cable is 2 metres in length and is fitted with a UK 3 pin plug, which has a 5 Amp fuse. This cable is ideal for connecting to our black JAMMA power supply. To connect to the black JAMMA power supply, simply cut off the connector and strip back...

    £4.79 inc. VAT
    £3.99 ex. VAT
    Add to Cart
  • 10 Pack Of Extension Wires With Crimp Connectors 10 Pack Of Extension Wires With Crimp Connectors

    10 Pack Of Extension Wires With Crimp Connectors

    This 10 pack of extension wires can be used as additions or replacements for existing wiring, when longer length connections are required. These wires are pre-crimped at one end with either 4.8mm OR 6.3mm female spade connectors and the other end of each...

    £9.84 inc. VAT
    £8.20 ex. VAT
    Out of stock
  • A To B USB 2.0 Cable A To B USB 2.0 Cable

    A To B USB 2.0 Cable

    Replacement A-B USB 2.0 cable. This A-B USB 2.0 cable is compatible with the PacDrive LED board, arcade controller board and is also ideal for connecting other USB devices, such as printers, scanners and external hard disk drives to your computer. ...

    £1.98 inc. VAT
    £1.65 ex. VAT
    Add to Cart
  • UltraStik 360 Button Harness

    UltraStik 360 Button Harness

    Input Mode: In this mode, you can connect 8 buttons to this connector, using the optional wiring harness. Each button appears as a game pad button on the PC. Each button is independently de-bounced using a state-method for maximum roll-over response...

    £7.19 inc. VAT
    £5.99 ex. VAT
    Add to Cart
  • Arcade Cabinet Marquee Illumination Kit

    Arcade Cabinet Marquee Illumination Kit

    This marquee illumination kit is ideal for arcade cabinet builders and can be used for illuminating the marquee area on an arcade machine. It can also be used for the marquee area for our flat pack upright kit. Installation is very straight forward:...

    £12.60 inc. VAT
    £10.50 ex. VAT
    Out of stock
  • U-HID Modular 8 Way Harness

    U-HID Modular 8 Way Harness

    This consists of 9 wires, (8 inputs plus ground) and plugs onto any of the sections of the U-HID connector. It is keyed to avoid incorrect connection. The harness is 900mm long (39 in) and has connectors at both ends. It can be cut in half to give two...

    £8.28 inc. VAT
    £6.90 ex. VAT
    Add to Cart
  • Female Crimp & Insulator Set - 50 x 2.8mm - 4.8mm - 6.3mm Female Crimp & Insulator Set - 50 x 2.8mm - 4.8mm - 6.3mm

    Female Crimp & Insulator Set - 50 x 2.8mm - 4.8mm - 6.3mm

    This connector and insulator set includes 50 x 2.8mm female spade connectors with insulators, 50 x 4.8mm female spade connectors with insulators and 50 x 6.3mm female spade connectors with insulators and comes in a plastic compartment case. This set is...

    £10.19 inc. VAT
    £8.49 ex. VAT
    Out of stock