This wiring set is ideal for those customers who want to use illuminated arcade buttons in their arcade project and want an easy way to power the LEDs when using a PC in their setup.
This daisy chain wiring set features 32 x insulated ground connections (6.3mm female crimps OR 2.8mm female crimps) and 32 x insulated positive connections (6.3mm female crimps or 2.8mm female crimps) and also a molex connector for connecting directly to a spare molex connector on a PC power supply. To connect to the bulb holders on illuminated buttons, simply push on a ground connection to one side of each of the bulb holders and push on a positive connection onto the other side of the bulb holder for each illuminated button. Once all your bulb holders have been wired up, just push the molex block connector into a spare molex on a PC power supply. This wiring set is available for 5V and 12V LED – Please choose at the time of order.
There are two options for the crimp size for this harness - please select at the time of order
6.3mm This will suit most illuminated buttons where the bulb holders have 6.3mm terminals
2.8mm Select this option for illuminated buttons that have built in LEDs, such as the AWUK Illuminated buttons below
Arcade World UK Ultimate 5V Illuminated Button - 28mm
Arcade World UK Ultimate 5V Illuminated Button - 24mm
* Length from first crimp to molex connector: Approx. 145cm
* Length between each of the 32 crimps: 12cm
* Easy connection for illuminated buttons
* 32 x insulated ground connections (6.3mm OR 2.8mm option)
* 32 x insulated positive connections (6.3mm OR 2.8mm option)
* Fitted with PC ready molex connector
* Available for 5V or 12V - select at the time of order
8 Reviews Hide Reviews Show Reviews
Very good product and good quality
Perfect for the job
Fast delivery, lengths are just right allowing me to tidy up after and did the job needed perfectly.
Great solution to connect both buttons, joysticks and led strips when using led lighting and you don't want to mess around with a arcade power supply and use a ac adapter instead.
Wiring For Illuminated Buttons
I bought a set of buttons from elsewhere, advertised as illuminated. They arrived without the required wiring. I came back to AWUK (as I should’ve done in the first place!) and ordered these. Took less than five minutes to install on a spare molex on my PSU and my pinball buttons now light up. Recommended.
Done the job
Very happy with what I got
Very tight fit
These are really good and don't fall off of the switch
Nice daisy !
Good quality, and necessary, if you like time saving.
Daisy Chain Wiring Set With Molex For Illuminated Buttons
Daisy Chain Wiring Set With Molex For Illuminated Buttons needed to complete set upfast these did the trick top notch