Product Description
The AWUK 100mm Jumbo RGB Colour Changing Illuminated Button is suitable for various projects, including museum exhibitions, academic, commercial and arcade projects. This jumbo arcade button features a clear translucent dome shaped plunger and clear bezel, which allows the RGB LED illumination to shine through. This jumbo button is 100mm in diameter and comes complete with 12v colour changing RGB LED, locking nut and microswitch with 4.8mm terminals. This button can also be used for photo booth projects, Pop 'N Music controls and various other applications.
Please view the product video below to see the illumination in action.
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath. These are normally referred to as “legends” and you can easily print your own on a PC printer and customise the button for your own requirements.
If you decide to illuminate the RGB LED supplied with this arcade button, you will need a 12V power source, which can be taken from a spare molex connector on a PC power supply or a JAMMA PSU. (12V Yellow wire and Black wire for ground)
*Please Note:
This 12V RGB LED connects in the same way as a single colour LED and NOT as 3 separate colour connections.
Intended Use - Suitability:
These RGB illuminated buttons are ideal for use when you just want to simply connect to a 12V power source and have them permanently changing colour from red to green to blue. This method does not require any extra hardware to have the colour changing illumination, so is a great way to save money, instead of having to buy the PAC64 or IPAC Ultimate PCBs. These single RGB LEDs can NOT be set up for fading or flashing sequences.
If your project requires fading or flashing sequences, please refer to our other RGB buttons and PacLED64 or I-PAC Ultimate, as these are more suitable for this purpose.
LED Connection:
To illuminate this RGB LED you will need a 12V power source. The 12V power can be taken from a spare molex connector on a PC power supply. The black wire is ground and the yellow wire is 12V.
What's included?
1 x Translucent 100mm Jumbo Arcade Button
1 x Fixing Ring
1 x 12V RGB Colour Changing LED
1 x Bulb Holder
Please Note:
This button is available to order as "Button only" (No microswitch included) OR "Complete with microswitch included"
If you require alternative switches, these can be ordered separately.
Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Product features:
* Jumbo size - 100mm diameter
* Translucent lens and bezel
* Dome shaped plunger
* Ideal for commercial/academic and arcade projects
* Supplied with 12V Colour Changing RGB LED
* Low cost alternative for adding colour changing illumination to your project
Product Dimensions:
* Please refer to thumbnail image above for data sheet
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 80mm
* Total diameter of plunger and outer bezel 100mm
Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection
A daisy chain ground harness would be suitable for these connections.
Pre-crimped wires and daisy chain ground harness can be ordered here:
1 Metre Long Crimped Wires
Daisy Chain Harness