Jumbo Illuminated Arcade Button With Flat Plunger - 100mm
- Calculated at Checkout
This jumbo illuminated button features a flat plunger and can be ordered with a 12V LED and also a choice of microswitch or no microswitch. This jumbo illuminated button can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays. This jumbo illuminated button with flat plunger will mount in a 24mm – 28mm mounting hole.
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The flat lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally refered to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
This button is available in a choice of colours: Red, Blue, Yellow, Green or White
If you decide to illuminate the LED supplied with this arcade button, you will need 12V power supply. This power can be taken from a spare molex connector on a PC power supply or a Jamma PSU. (12V Yellow wire and Black wire for ground)
* Jumbo sized - 100mm diameter
* Flat shaped plunger
* Ideal for commercial & academic projects
* Lens cap can be removed for adding your own legend
* Suitable for heavy use
* Please refer to thumbnail image above for datasheet
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 79.5mm
* Total diameter of plunger and outer bezel 98mm
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection
A daisy chain ground harness would be suitable for these connections.
Pre-crimped wires and daisy chain ground harness can be ordered here:
1 Metre Long Crimped Wires
Daisy Chain Harness