Jumbo Dome Shaped 100mm Illuminated Arcade Button

(1 review) Write a Review
£9.00 - £9.60 (Inc. VAT)
£7.50 - £8.00 (Ex. VAT)
Calculated at Checkout


This jumbo button is 100mm in diameter and features a dome shaped plunger and is suitable for various projects, including museum exhibitions, academic, and commercial. This button can also be used for photo booth projects, arcade machines, Pop 'N Music controls and various other applications.

Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.

LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs

Microswitch Option:
If selected, this button will be supplied with: ZIPPY Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches

Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements. 

What's included:
1 x 100mm Jumbo Arcade Button
1 x Fixing Ring
1 x Bulb holder 


Product features:
* Jumbo sized - 100mm diameter
* Dome shaped plunger
* Ideal for commercial & academic projects
* A range of compatible microswitches and LEDs are available to purchase separately 

Product Dimensions:
* Please refer to thumbnail image above for datasheet
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 80mm
* Total diameter of plunger and outer bezel 100mm

Wiring Information:
This button requires crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
This button requires 6.3mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables


  • 4
    good product. excellent packaging. fast shipping and helpful staff.

    Posted by Unknown on 8th Oct 2014

    good product. excellent packaging. fast shipping and helpful staff.

Customers Also Viewed