Low Profile 60mm Dome Shaped Illuminated Arcade Button

Product Description

This 60mm dome shaped illuminated button is a good choice for museum exhibition projects, academic projects and commercial use. This dome shaped 60mm illuminated button can also be used for photo booth projects, arcade machines and various other applications. 

The plunger on this button is dome shaped and the lens cap can be removed, which is ideal if you want to print your own artwork, logo or text and place underneath the lens to suit your project. This button will mount in a 24-28mm mounting hole – please refer to the datasheet image for measurements.

Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.

LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs

Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches

This button is available in a choice of colours:
Blue - Green - Red - White – Yellow

Illuminating The Button:
If you decide to illuminate this button, you will need a 5V or 12V power source, depending on the LED or bayonet bulb option chosen. This can be taken from a spare molex connector on a PC power supply or a JAMMA PSU. (Red wire is 5V, Yellow wire is 12V, Black wire is Ground)

Product features:
* Ideal for various commercial and academic projects
* Dome shaped plunger
* Lens cap can be removed to insert your own artwork or writing
* Choice of 5 colours
* Looks great when illuminated
* 60mm diameter

Wiring Information:
This button requires 4.8mm crimped wires for connecting the microswitch.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).

This button requires 6.3mm crimped wires for illuminating the bulb or LED.
1 wire for the positive connection and 1 wire for the negative connection

Pre-crimped wires and daisy chain ground harness can be ordered here:
10 x 1 Metre Long Crimped Wires
Daisy Chain Harness