Product Description
The Crown conversion harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness.
By using this Crown conversion harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple.
Product features:
* Interfaces to a Sanwa JLF-H or JST-XH cable
* Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.
Connecting Wire Colours for QanBa Q4 RAF:
Crown conversion harness:
RED = UP
ORANGE = DOWN
GREEN = LEFT
YELLOW = RIGHT
BLACK = GROUND
This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.
Product Videos
Custom Field
Product Reviews
11 Reviews Hide Reviews Show Reviews
-
Harness too short, unable to wire up microswitches properly
This conversion harness sounds like a good idea in theory, but the practice is less than stellar in my personal experience - this is my 6th and likely last one, as no matter how much or how little leeway I give each wire, no matter the position of the microswitches, I cannot get them all to line up properly, and I am afraid of this breaking too easily (see my previous review). The wires need to be longer.
-
Quite fragile, so get it right first time
Useful for converting joysticks with open (individual) microswitches for use on more modern interfaces with 5-pin harnesses. There is, however, a snag. It's a little too fragile (this is the 3rd one I've had in a year and a spade connector for one of the directions has broken on me), so you only have one chance with these harnesses.
-
K lever harness
Great harness great price use on all my levers
-
Excellent
Excellent
-
Simple and good
All you need for your korean lever.
-
Does the job!
Using a Korean stick and you need some form of connector well, here it is!
-
Cable
Fitted Perfect in the Qanba Obsidian.
-
Harness
Way easier than making your own wires. Just plug it in and play
-
Great for a Korean stick conversion
A well-made harness designed to daisy chain around the outer diameter of a Korean stick. I used this with a Crown CWL-309FJ-KMS-ST35 within my Venom Arcade stick to great success. Even when I had to slightly bend a crimp/spade connector due to lack of space inside the case it showed no signs of failure.
-
Harness
I have Hori RAP-N and sadly every connector is inverted to example. So if you do it like on pictures your inputs show opposite. But everything works fine after re-wiring.
-
Crown Harness
This little harness made it super easy to swap out the Seimitsu Latest Version LS-32-01 Arcade Joystick for the same joystick but with the microswitches not soldered to the board, the Seimitsu Latest Version LS-32 Arcade Joystick (AKA LS-300) This harness now makes it much easier to swap out joysticks inside my TE Madcatz stick. Get them before they are gone