Product Description
The Crown conversion harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness. Simply connect the harness to the .187” terminals on the joystick microswitches and the other end of this harness will slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick. For microswitch based joysticks, each joystick has 4 x microswitches and each microswitch requires a separate ground and signal wire connection. This is different to a Sanwa JLF series joystick, which has its microswitches soldered on to a PCB and connects via a JLF-H 5 pin harness.
By using this Crown conversion harness, you can interface most joysticks with .187” microswitch terminals through to a Sanwa JLF-H or JST-XH cable, which makes connection simple.
Product features:
* Interfaces to a Sanwa JLF-H or JST-XH cable
* Converts joysticks with standard .187” microswitch terminals for use with a Sanwa JLF-H or JST-XH cable.
Connecting Wire Colours for QanBa Q4 RAF:
Crown conversion harness:
RED = UP
ORANGE = DOWN
GREEN = LEFT
YELLOW = RIGHT
BLACK = GROUND
This conversion harness is suitable for any joystick that features 4.8mm (.187") microswitch terminals.