Classic Arcade Style LED Illuminated push buttons with RGB LED for full variable-colour mixing!
Identical to conventional classic arcade buttons but with translucent body and top. Internal LED can be lit to any colour.
Standard 28-30mm mounting hole.
Specially designed internal diffuser sleeve for even colour.
Switches have 4.8 mm tags.
Pre-wired for PacLED64 controller. Just plug in!
Supplied with a 5V RGB LED with 500mm length integral wiring for
These do not have internal resistors and can only be used with current-controlled drivers such as the PacLED64 or I-PAC Ultimate I/O.
1 x Ultralux Classic RGB Arcade Button
1 x RGB LED & Wiring harness
1 x Fixing Ring
This button is available to order as "Button only" (No microswitch) OR "With standard microswitch"
If you require alternative switches, these can be ordered separately.
If selected, this button will be supplied with: Ultralux Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Lighting the RGB illuminated buttons:
Full dimming control including RGB Colour mixing:
See our PacLED64 LED Controller for full details
If you simply want to light the buttons permanently, just connect to a 5 volt supply, such as from a PC hard drive power connector.
Simple Off/On Control:
Check out our Pac-Drive output driver board. This is supported by several Front End menus such as Mala, to control pre-set flash sequences and illuminate the buttons used in each game.