2 Player 3/4 Scale Upright Arcade Cabinet Flat Pack Kit - Black
- Manufactured to order - 5 business day lead time
- Calculated at Checkout
This 3/4 scale upright arcade cabinet kit is manufactured from 12mm MDF and is just under 4ft tall when assembled, so ideal for kids or anyone that wants a smaller form factor arcade cabinet. A riser stand is also available to purchase separately, which will raise the height by approx 30cm.
This 3/4 scale upright arcade cabinet kit features a black finish, 2 player pre-drilled control panel layout, internal shelf to store hardware components and includes a plexi set for monitor and marquee area. The monitor viewing area provides ample room for a monitor of up to 20” (5:4 ratio) or 18.5” (16:9 ratio) and there is also a pre-cut hole in the back of the cabinet for those customers who want to fit an inlet switch. This 3/4 scale arcade cabinet kit is supplied in flat pack form for self assembly and all fixings are included.
Optional riser can be purchased separately here: Riser for 3/4 Scale Upright Arcade Cabinet Flat Pack Kit - Black
* 3/4 scale upright arcade cabinet kit
* Ideal for kids or customers with limited space
* Riser available to purchase separately
* Low cost arcade cabinet kit
* Plexi set included
* Supplied in flat pack form for self assembly
Monitor plexi size - 438mm x 453mm x 4mm
Marquee plexi size - 89mm x 453mm x 4mm
Assembled dimensions - 1170mm x 467mm x 505mm
Required to Assemble:
3mm Allen Key
5mm Drill Bit and Drill
Compatible with VESA 75mm and 100mm square hole pattern.
Screen - Maximum Size
Compatible with monitors up to:
20" 5:4 ratio
18.5" 16:9 ratio
The above is for guidance only. We strongly recommend measuring the outer measurements of the monitor to ensure they do not exceed the following dimensions:
420 mm (h) – Maximum OUTER height
440 mm (w) – Maximum OUTER width
Compatible with Zippyy, Sanwa, Seimitsu and others with SE mounting plates.
Compatible with 28mm and 30mm buttons, including Sanwa, SuzoHapp, Industrias Lorenzo, Seimitsu, Samducksa and QanBa.
Number of player buttons and joystick holes
2 x Joystick holes (1 per player)
12 x Player Button holes (6 per player)
4 x Admin Button holes (2 per player)
The speaker holes are designed to fit a speak with mounting holes 75mm apart or bigger.
Compatible with 1/2” (12.7mm) T-Molding, that fits a 1/16” (1.58mm) slot. We recommend purchasing 21ft (6.5m) of T-Molding to complete the Arcade Kit.
T-Molding can be purchased separately here: T-Molding
Brilliant kit. Went together well and looks awsome.
One small thing...the screws for the rear panel magnets need to be a bit shorter, they cause a bulge on the outside of the cabinet just before they clamp the assembly.