This full size 4 player 27" upright arcade cabinet kit is manufactured with 18mm & 12mm MDF, features a black finish, 4 player pre-drilled control panel layout, internal shelf to store hardware components and includes a plexi set for monitor and marquee area. The monitor viewing area provides ample room for a monitor of up to 27” (with a maximum outer width of 69cm) and there is also a pre-cut hole in the back of the cabinet for those customers who want to fit an inlet switch. This upright arcade cabinet kit is supplied in flat pack form for self assembly and all fixings are included.
Pre-Drilled Plexi For Control Panel Option:
This kit is available to order WITH or WITHOUT a pre-drilled plexi for the control panel. The clear plexi is a good option to choose, when you intend to put artwork underneath. This can be selected from the options above when ordering.
* Full size upright arcade cabinet kit
* Plexi set included
* Supplied in flat pack form for self assembly
* Control panel is removable for easy access to buttons and joysticks.
* The kit is built in two sections and joined to form a full size upright.
* Internal shelf included
* The sides, top panel, speaker panel and control panel are 18mm, other panels are 12mm. Once built the 12mm is not noticeable and does not affect rigidity in any way.
* Control panel box has a hinged lid for easy access to buttons and joysticks. The whole box is removable from the main body with the use of screws.
* The control panel box has an opening on the base and on the back for access into the main cabinet for cable management.
Monitor plexi size - 700mm x 614mm
Marquee size - 110mm x 690mm x 4mm
Assembled dimensions - 1685mm x 1160mm x 680mm
Required to Assemble:
3mm Allen Key
5mm Drill Bit and Drill
Compatible with VESA 75mm and 100mm square hole pattern and 200mm x 100mm.
Screen - Maximum Size
Compatible with monitors up to 27"
The above is for guidance only. We strongly recommend measuring the outer measurements of the monitor to ensure they do not exceed the following dimensions:
550 mm (h) – Maximum OUTER height
690 mm (w) – Maximum OUTER width
Compatible with Zippyy, Sanwa, Seimitsu and others with SE mounting plates.
Compatible with 28mm and 30mm buttons, including Sanwa, SuzoHapp, Industrias Lorenzo, Seimitsu, Samducksa and QanBa.
Number of player buttons and joystick holes
4 x Joystick holes (1 per player)
20 x Player Button holes (2 x 6 per player - 2 x 4 per player)
8 x Admin Button holes
The speaker holes are designed to fit a speak with mounting holes 75mm apart or bigger.
Compatible with 3/4” (19mm) T-Molding, that fits a 1/16” (1.58mm) slot. We recommend purchasing 34ft (10.5m) of T-Molding to complete the Arcade Kit.
Main body - 20ft
Control panel lid - 10ft
Control panel sides - 4ft
T-Molding can be purchased separately here: T-Molding