This 3/4 scale upright arcade cabinet kit is manufactured from 12mm MDF and is just under 4ft tall when assembled, so ideal for kids or anyone that wants a smaller form factor arcade cabinet. A riser stand is also available to purchase separately, which will raise the height by approx 30cm.
This 3/4 scale upright arcade cabinet kit features a plain MDF finish, 2 player pre-drilled control panel layout, internal shelf to store hardware components and includes a plexi set for monitor and marquee area. The monitor viewing area provides ample room for a monitor of up to 20” (5:4 ratio) or 18.5” (16:9 ratio) and there is also a pre-cut hole in the back of the cabinet for those customers who want to fit an inlet switch. This 3/4 scale arcade cabinet kit is supplied in flat pack form for self assembly and all fixings are included.
Optional riser can be purchased separately here: Riser for 3/4 Scale Upright Arcade Cabinet Flat Pack Kit - Plain MDF
Control Panel Options:
This kit can also be ordered with a blank control panel or custom button layout (for example, please add an extra hole for a SpinTrak spinner). If you require any of these options, simply leave a note in the "Customer Comments" section during checkout.
* 3/4 scale upright arcade cabinet kit
* Ideal for kids or customers with limited space
* Riser available to purchase separately
* Low cost arcade cabinet kit
* Plexi set included
* Supplied in flat pack form for self assembly
Monitor plexi size - 438mm x 453mm x 4mm
Marquee plexi size - 89mm x 453mm x 4mm
Assembled dimensions - 1170mm x 467mm x 505mm
Required to Assemble:
3mm Allen Key
5mm Drill Bit and Drill
Compatible with VESA 75mm and 100mm square hole pattern.
Screen - Maximum Size
Compatible with monitors up to:
20" 5:4 ratio
18.5" 16:9 ratio
The above is for guidance only. We strongly recommend measuring the outer measurements of the monitor to ensure they do not exceed the following dimensions:
420 mm (h) – Maximum OUTER height
440 mm (w) – Maximum OUTER width
Compatible with Zippyy, Sanwa, Seimitsu and others with SE mounting plates. This kit IS NOT compatible with ServoStik joysticks.
Compatible with 28mm and 30mm buttons, including Sanwa, SuzoHapp, Industrias Lorenzo, Seimitsu, Samducksa and QanBa.
Number of player buttons and joystick holes
2 x Joystick holes (1 per player)
12 x Player Button holes (6 per player)
4 x Admin Button holes (2 per player)
The speaker holes are designed to fit a speak with mounting holes 75mm apart or bigger.
Compatible with 1/2” (12.7mm) T-Molding, that fits a 1/16” (1.58mm) slot. We recommend purchasing 21ft (6.5m) of T-Molding to complete the Arcade Kit.
T-Molding can be purchased separately here: T-Molding