Square 44mm Low Profile Illuminated Arcade Button

This 44mm square illuminated arcade button features a low profile black body and is available in a choice of colours. This button can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. This high profile 44mm square arcade button comes complete with fixing ring, spacer and bulb holder and mounts in a 24 mm to 28 mm mounting hole.

Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.

LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs

Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches

Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements. 

What's included:
1 x 44mm low profile square arcade button
1 x Fixing ring
1 x Spacer
1 x Bulb holder

Product features:
* Ideal for various commercial and academic projects 
* Square shaped plunger
* Lens cap can be removed to insert your own artwork or writing
* Low cost
* A range of compatible microswitches and LEDs are available to purchase separately

Product Dimensions:
Plunger Size: 34mm
Total Diameter Inc. Bezel: 44mm
Bezel Height: 3mm
Mounting Hole Required: 24mm To 28mm 

Wiring Information:
This button requires crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
This button requires 6.3 mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables