Triangular 42mm Low Profile Illuminated Arcade Button
- Condition:
- New
- Shipping:
- Calculated at Checkout
Description
This low profile 42mm triangular illuminated arcade button is available in a choice of colours and can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. It is also a good option for jukebox projects. This low profile 42mm triangular illuminated arcade button comes complete with fixing ring, spacer and bulb holder and mounts in a 24mm to 28mm mounting hole.
Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
What's included:
1 x 42mm low profile triangular arcade button
1 x Fixing ring
1 x Spacer
1 x Bulb holder
Product features:
* Ideal for various commercial and academic projects
* Ideal for jukebox projects
* Triangular shaped plunger
* Lens cap can be removed to insert your own artwork or text
* Low cost
* A range of compatible microswitches and LEDs are available to purchase separately
Product Dimensions:
Plunger Size: 32mm
Total Diameter Inc. Bezel: 42mm
Bezel Height: 4mm
Mounting Hole Required: 24mm To 28mm
Wiring Information:
This button requires crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
This button requires 6.3mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables
Reviews
-
Fantastic shape for custom build !
Fantastic shape for custom build ! This, along with another 3, made up a custom arcade panel, two for save, load and two for start, select.