Categories

Brook Xone SE Controller Adapter - PS3-4/Xone/360/ To Nintendo Switch

Brand :

(No reviews yet) Write a Review
£53.99
(Inc. VAT)
£44.99
(Ex. VAT)
Condition:
New
Shipping:
Calculated at Checkout

Description

X One SE Adapter
HIGH-END LUXURY

X one SE Adapter (Second Edition)
Use XSX|S / Elite Series 1&2 / Xbox one Controller on PS5, PS4 and Switch, support Audio Function and Motion Control!

2 versions of X One SE
- Mirco-B, Type-C -
- Support play PS4 Games on PS5 -

https://www.brookaccessory.com/download/X%20One/

Overview
Brook X One SE Adapter controller is perfectly compatible to Xbox Series X / S / One, PlayStation 4, Nintendo Switch and PC; motion control and 3.5mm microphone headset are entirely supported.

2 versions of X One SE:
Type-C for XSX|S and Elite Series 2 Controller
Micro-B for Xbox One and Elite series 1 Controller
xse-xonese-01.jpg

Design Style
The X One SE has strict requirements for appearance, material, pattern and color; "Seems to be integrated with the controller" is the design criterion for it.

Audio
Support Audio input and output. This means your headset can continue to be used normally – even on XSX|S.

Motion Control
For both PS4 and Switch, X One SE provides motion control feature. It’s time to release full potential of you controller.

Easy to install
1. Plug the X One Adapter SE into the lower connector of the controller.
2. Flip over to the back of the controller.
3. Insert the Micro-USB end of the X One SE cable into the back connector of the X One SE.
4. Press and hold the cable so that it is flat against the controller.
5. Insert the Type-C end of the X One Adapter SE cable into the top connector of the controller.
xse-how-to-install-en.jpg

LED

LED Lighting Status
Blue LED Permanently on X One Adapter SE and console are currently connected.
Blue LED Blinking Wired device is not connected
Wireless device is searching for connection…
Blue and Red Blinking alternately Wireless connection mode is ON
Searching for pairing device…
Red LED Blinking Turbo-Remap button is being pressed
LED off Power Off / Entering Remap Settings

xose-led.jpg

Use on PS4
Toggle the "PS4/Xbox One/Switch slide switch" to where it is labeled "PS".
xse-xonese-02.jpg

Wired Connection:
Simply connect the controller to console via X One Adapter SE's "Upgrade/Charge port".

Wireless Connection:
The first time you use the X One Adapter SE, you need to pair it with the wireless controller: go to the "Bluetooth Device" screen and select "Wireless Controller" on your console setting. After waking up the controller, press and hold the “Hold/Wireless pairing button” of X One Adapter SE for 2 seconds to make the LED of X One Adapter SE blink red and blue alternately, and wait for a few seconds until the LED of X One Adapter SE shows a constant blue light. After that, you only need to wake up the controller every time you use the X One Adapter SE.

Use on Xbox Series X/Xbox Series S/Xbox One/PC
Toggle the "PS4/Xbox One/Switch slide switch" to the bar labeled between "PS" and “NS”.
xse-xonese-05.jpg

In this mode, the X One Adapter SE is set to off, please use the controller as a normal connection.

Note: If you need to use Remap/Turbo/Hold function when connecting to a PC, it is recommended that you connect in PS4 simulation mode.

Use on Switch
Toggle the "PS4/Xbox One/Switch slide switch" to where it is labeled "NS".
xse-psns.jpg

Wired Connection:
Simply connect the controller to console via X One Adapter SE's "Upgrade/Charge port".

Wireless Connection:
The first time you use the X One Adapter SE, you need to pair it with the wireless controller: go to the "Controller" screen on your console. After waking up the controller, press and hold the “Hold/Wireless pairing button” of X One Adapter SE for 2 seconds to make the LED of X One Adapter SE blink red and blue alternately, and wait for a few seconds until the LED of X One Adapter SE shows a constant blue light. After that, you only need to wake up the controller every time you use the X One Adapter SE.

xse-xonese-101.jpg
xse-xonese-03.jpg
xse-xonese-04.jpg 

Use of Simulated Touchpad
When using on PS4, press and hold the X One Adapter SE's "Capture/Touchpad Simulate button” and the controller's right analog stick(RS) to simulate touchpad operation.

xse-control-mode.jpg

The default mode of “Capture/Touchpad Simulate button” is "Easy mode", and with RS, you can simulate pressing the touchpad.

However, you can enter "Full mode" temporarily by holding down the “Capture/Touchpad Simulate button”; in this mode, you can simulate more complete touchpad operation; RS simulates the track of sliding on the touchpad, and RSB simulates pressing the touchpad.

If you release the “Capture/Touchpad Simulate button” in "Full mode", it will return to "Easy mode" again.
xse-easy-mode.jpg
xse-full-mode.jpg
xse-full-mode2.jpg

Turbo Function
Function Settings
Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB(hereinafter referred to as FK).
Press the “Turbo button” and the FK button at the same time, the controller will vibrate to indicate the successful setting.
EX: If you press "Turbo button" and "A" button at the same time, then "A" button can be turbo fire.

Cancelling Function
Cancellation of single button turbo function:
If you press the "Turbo button” and the FK button that has been configured with the turbo function, the controller will vibrate to indicate that the setting is canceled.
EX: If you press the "Turbo button” and the "A" button at the same time, the "A" button will cancel the turbo fire.

Cancellation of all button turbo function:
Press and hold the “Turbo button” for 2 seconds, the controller will vibrate 3 times to cancel all the settings.

v1.1t update, add turbo speed adjustment:
The default is 10Hz, can be set as 5Hz/7.5Hz/10Hz/12.5Hz/15Hz
Turbo button + Dpad UP: speed up Turbo button + Dpad DOWN: speed down
xse-turbo.jpgxse-turbo2.jpg

Hold Button Function
Function Settings
Buttons that can be Remap include: D-Pad, A, B, X, Y, LB, RB, LT, RT, LSB, RSB and 4 paddles for the Xbox One Elite Series 2 itself(hereinafter referred to as FK).
Press the “Hold/Wireless pairing button” and the FK button at the same time, the controller will vibrate to indicate the successful setting.

EX: If you press the “Hold/Wireless pairing button” and the “A” button at the same time, and then release it, the “A” button is considered to be being held continuously.

Note: This function can be used in conjunction with the Turbo function and Remap Function. EX: If you set a button that has Turbo function, and then set the Hold Button Function on it, the button will still be burst when you release your hands.

Cancelling Function
Pressing a button that has been set for Hold Button Function automatically cancels its Hold Button Function.
xse-xonese-06.jpgxse-xonese-07.jpg

Remap Function
Function Settings
Buttons that can be Remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB and 4 paddles for the Xbox One Elite Series 2 itself(hereinafter referred to as FK).

Step 1. Choosing a FK button:
Press the “Remap button” and FK button at the same time. The LED of the controller will turn off.
xse-xonese-08.jpg

Step 2. Choosing button to be set:
Press all keys that need to be assigned to FK at the same time and the controller will vibrate. When all keys are released, the LED will light up again to indicate successful setup.

EX: If you press "Remap button" and "A" button at the same time, then release the button and press X+Y button, the "A" button will be set to X+Y.
xse-xonese-09.jpg

Cancelling Function
Cancellation of single button remap function:
Press the "Remap button" and the FK button with the Remap function, release it and press the FK button again to redefine the FK function.

EX: If you press the “Remap button” and the “A” button that has been set to X+Y at the same time, release the button and press the A button again, then the X+Y setting on the “A” button will be cancelled.

Cancellation of all button remap function:
Press and hold the “Remap button” for 2 seconds, the controller will vibrate 3 times to cancel all the settings.
xse-xonese-10.jpg

About the use of paddles
When the Profile button on the Xbox One Elite Series 2 is toggled off, the 4 paddles on the back of the controller can be used as FKs. Note: You can set the functions of other FKs to the paddles, but not the paddles to other FKs.

Function list

X One
     Adapter
 SE
   PS4

XBOX Series X
XBOX Series S
       XBOX One

         SWITCH

Wired Mode

Wireless Mode

Audio Function

Χ

Motion Control

Χ

Turbo/Remap/
Hold Function

Χ

PC Connection

●*

●*

STEAM Connection

*Driver may needed

 

Corresponding Buttons List

XB1

PS4

Switch

PC

D-Pad (U/D/L/R)

Lx / Ly

Rx / Ry

A

B

A

B

A

B

X

Y

X

Y

X

Y

LB

L1

L

LB

RB

R1

R

RB

LT

L2

ZL

LT

RT

R2

ZR

RT

LSB

L3

L3

LSB

RSB

R3

R3

RSB

MENU

OPTIONS

+

START

VIEW

SHARE

-

BACK

Xbox Guide Key

PS Key

Home

Xbox Guide Key

Note:When connected to the Switch, the “Capture/Touchpad simulate button” can be used instead of the Capture button.

Videos

Customers Also Viewed