Product Description
May the force be with Saturn and Dreamcast...forever.
* 200 blocks of DC memory!
* Support vibration!
* Now, it's time to use Xbox Elite Series 2 Controller to play Shenmue!
Let PS4, PS3, Xbox One, Xbox 360 and Switch Pro Controllers insert more power to Saturn and Dreamcast!
Introduction:
Saturn and Dreamcast are the common memory of a generation, and now we provide more ways to tap the potential of these two consoles. Now you can use Xbox One, Xbox 360, PS4, PS3 controllers on them, and the Switch Pro controller, Xbox Elite controller, Xbox Elite Series 2 controller, Xbox adaptive controller, even Retro-Bit Saturn USB controller are all supporable.
Features:
LED:
Console LED |
Connect to Saturn |
Connect to Dreamcast |
Switching Method* |
Connect to PC |
Green LED Permanently on |
3D Controller Mode |
Gamepad Mode |
Select+Triangle |
PC Connecting |
Red LED Permanently on |
Standard Mode |
Arcade Stick Mode |
Select+Cross |
|
*The example of the switching method used PS3 / PS4 controller. Please refer to the Corresponding Buttons List when using other controllers.
Device LED |
Status |
Red LED Permanently on |
The connector and the device are currently connected. |
Red LED Slow Blinking (Once every two seconds) |
Wired device is not connected Wireless device is searching for connection… |
Red LED Fast Blinking(Seven times per second) |
Wireless pairing mode is ON Searching for pairing device… |
Red LED Blinking (Five times per second) |
Turbo-Remap button is being pressed |
Red LED Off |
Entering Turbo-Remap Settings |
Connecting to the Device
Connect Wingman SD to Saturn / Dreamcast / PC via port. Permanently light of the Console Green LED of Wingman SD indicates that the connection to the console is successful.
Wired Connection:
Connect the Xbox 360 / Xbox One / PS3 / PS4 / Switch wired controller or game pad to Wingman SD through the USB port. Some devices with high power consumption, such as the Switch Pro controller, require an external USB power source for normal use.
Using a X360 wireless controller:
Simply connect the wireless X360 wireless receiver to the Wingman SD through the USB port.
Using Xbox One wireless controller / Xbox One Elite Series 2 controller:
Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman SD and the controller will be ready for use. When connecting, hold the Brook Key on the Wingman SD for 1 second to enter wireless pairing mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Device Red LED of Wingman SD indicates that pairing is in progress.
Using PS3 / PS4 / Switch Pro wireless controller:
After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / Switch Pro wireless controller.
Check whether the Device Red LED of the Wingman SD is permanently on. This indicates that the connection is completed.
Connection Pairing Supplementary Instructions
Holding the Brook Key on the Wingman SD for 1 second will activate wireless connection pairing mode. The Wingman SD will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:
* The connection pairing with the wireless controller is successful.
* The connection pairing is unsuccessful after 90 seconds.
* The Brook Key is held for 1 second.
Wireless connection records between an Xbox One wireless controller (with Bluetooth function) / Xbox One Series 2 and the Wingman SD will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.
If Xbox One Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman SD’s Turbo or Remap settings. As Xbox One Elite Series 1 controller is incapable of turning off profile settings, using Xbox One Elite Series 1 controller might result in Remap function overlapping.
Switch the input mode on Saturn
The default controller input setting of Wingman SD is “3D Control mode”. When using a standard controller, you can switch to ”Standard mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.
Switch to “3D Control mode”:
Press VIEW + Y, the Console Green LED is permanently on.
Switch to “Standard mode”:
Press VIEW + A, the Console Red LED is permanently on.
Switch the input mode on Dreamcast
The default controller input setting of Wingman SD is “Gamepad mode”. When using a arcade stick, you can switch to ”Arcade Stick mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.
Switch to “Gamepad mode”:
Press VIEW + Y, the Console Green LED is permanently on.
Switch to “Arcade Stick mode”:
Press VIEW + A, the Console Red LED is permanently on.
Corresponding Buttons List:
PS3 |
PS4 |
X360 |
XB1 |
Switch |
PC |
Saturn |
Dreamcast |
D-Pad (U/D/L/R) |
|||||||
Lx / Ly |
Analog Stick |
Analog Stick |
|||||
Rx / Ry |
|
|
|||||
╳ |
╳ |
A |
A |
B |
A |
A |
A |
○ |
○ |
B |
B |
A |
B |
B |
B |
□ |
□ |
X |
X |
Y |
X |
X |
X |
△ |
△ |
Y |
Y |
X |
Y |
Y |
Y |
L1 |
L1 |
LB |
LB |
L |
LB |
Z |
|
R1 |
R1 |
RB |
RB |
R |
RB |
C |
|
L2 |
L2 |
LT |
LT |
ZL |
LT |
L |
L |
R2 |
R2 |
RT |
RT |
ZR |
RT |
R |
R |
L3 |
L3 |
LSB |
LSB |
L3 |
LSB |
|
|
R3 |
R3 |
RSB |
RSB |
R3 |
RSB |
|
|
Start |
OPTIONS |
START |
MENU |
+ |
START |
START |
START |
Select |
SHARE |
BACK |
VIEW |
- |
BACK |
|
|
PS Key |
PS Key |
Xbox Guide Key |
Xbox Guide Key |
Home |
Xbox Guide Key |
START |
START |
Turbo Function Settings
The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.
Turbo Function Settings
Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the Device Red LED of the Wingman SD will be off.
Step 2.Choosing a FK button: (e.g. Setting A as turbo function)
Hold VIEW, then press A
Step 3.Completing Setting Mode:
Release all buttons, then press MENU to save settings.
Step 4.Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.
Cancelling Turbo Function
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the Device Red LED of the Wingman SD will be off.
Step 2.Erasing all Turbo function buttons
Press VIEW + MENU
Step 3.Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.
Button Remap Settings
The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.
Button Remap Settings
Buttons that can be remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the Device Red LED of the Wingman SD will be off.
Step 2.Choosing a FK button: (e.g. Setting X as A+B)
Press X
Step 3.Choosing button to be set:
Hold VIEW, then press A + B.
Step 4.Completing setting mode:
Release all buttons, then press MENU to save settings.
Step 5.Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.
Cancelling Button Remap Settings
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the Device Red LED of the Wingman SD will be off
Step 2.Erasing all settings for Button Remap Settings
Press VIEW + MENU.
Step 3.Exit setting mode:
Press Xbox Guide, the Device Red LED of the Wingman SD will be permanently on.
Notice:
*Each Wingman SD can only connect to a single Xbox 360 / Xbox One / PS3 / PS4 / Switch device. Wingman SD supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly.
*Wingman SD do not support headset/microphone function which provides by controller audio jack.