Sanwa OBSC-30-C Snap In Arcade Button

The Sanwa OBSC-30-C is a 30mm snap-in style translucent arcade button that has a built-in SW-68 microswitch with 2.8mm terminals. This button is usually used as an action button on fight sticks. The lens cap on this button can be removed, which will allow you to place artwork underneath - Ideal for fight stick modding. The OBSC-30-C is available in a choice of cool looking translucent colours.

These high quality arcade buttons are imported direct from Sanwa Denshi Co in Japan and are a perfect choice for fight stick modding. This button is ideally suited for mounting in metal control panels, with a thickness of up to 3.7mm maximum and mount in a 30mm mounting hole. Each button has a plastic clipper on either side that locks into place when mounted on a metal control panel or fight stick. We also sell matching 24mm buttons (OBSC-24-C) – The OBSC-24-C is usually used as a start or select button on fight sticks.

Product Features:
* Cool translucent finish
* Choice of colours
* Lens cap can be removed for adding artwork
* High quality
* Sanwa branded
* Durable
* Matching 24mm buttons also available

Mounting hole diameter: 30mm ± 0.1 
Mounting plate thickness: 2-4mm MAX 
Microswitch built in: SW-68 

Matching 24mm buttons are also available here:
Sanwa OBSC-24-C Arcade Button
The OBSC-24-C is a matching 24mm button for the OBSC-30-C
The OBSC-24-C is usually used as a start or select button on fight sticks

Wiring Info: 
This button requires 2.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO)
Pre-crimped 2.8mm wires and 2.8mm daisy chain ground harnesses can be ordered here:
10 x 1 Metre Long Insulated 2.8mm Crimped Wires
Insulated Daisy Chain Harness With 32 Crimp Connections