Rectangular Illuminated Arcade Button
- Condition:
- New
- Shipping:
- Calculated at Checkout
Description
This rectangular arcade button features a posi-Lok design for a positive fit, is available in a choice of colours and can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. Each rectangular arcade button comes complete with fixing ring and bulb holder and mounts in a 24 mm to 28 mm mounting hole.
Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
Microswitch Option:
If selected, this button will be supplied with: ZIPPY Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
What's included:
1 x Rectangular Arcade Button
1 x Fixing Ring
1 x Bulb holder
Product Features:
* Rectangular shaped plunger
* Ideal for arcade, commercial & academic projects
* Lens cap can be removed for adding your own legend
* Suitable for heavy use
* A range of compatible microswitches and LEDs are available to purchase separately
Product Dimensions:
Bezel Length: 50mm
Bezel Width: 33mm
Bezel Height: 10mm
Total Button Height: 45mm
Wiring Information:
These buttons require crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3 mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables
Reviews
-
Its a button!
Yes its a button, I was looking for a coin credit button and only ones I found were a good few £ more.. so the idea was to get this one and install my own insert.. and it paid off. Its easy to take apart and install your own insert text, just print it the correct size, as in a pre review the 2 small posts at the back are there but not really needed so either cut them off or drill 2 small holes so they fit inside.
-
Simple, effective button
This button is very simple and very effective. It does however come with fixing pegs moulded on the rear that the description fails to point out so will not sit flush until holes have been drilled into place. Thanks for emitting this Arcadeworld. You've created more work for me haha
