Metal Plate Dimension: Length: 34cm - Height: 14cm
Installation of the plexiglass & metal base plate is easy. Step 1: Simply remove the screws holding the stock plexi in place then remove the original plexi. Step 2: Now remove the screws holding the metal base plate in place, lift up and remove the parts. Step 3: Now install the parts in the 6 button metal base. Step 4: Place the 6 button base plate over the mounting holes and secure in place with original screws. Step 5: Place your choice of artwork over the metal plate Step 6: Finally secure the 6 button plexi in place with original screws
*Please Note: There is a protective film on both sides of the plexi. This is to help prevent scratching/damage during transit. To remove this, simply peel it up from one of the corners and remove from both sides.