High Profile 60mm Illuminated Arcade Button

£2.28 (Inc. VAT)

£1.90 (Ex. VAT)

(2 reviews) Write a Review

Current Stock:

Condition:

New

Weight:

50 Grams

Shipping:

Calculated at Checkout

Product Description
Product Reviews

This high profile 60mm illuminated arcade button is available in a choice of colours and can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. Each high profile 60mm arcade button comes complete with fixing ring and bulb holder and mounts in a 24 mm to 28 mm mounting hole.

Please Note:
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.

LED Option:
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs

Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches

Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.

What's included:
1 x 60mm High Profile Arcade Button
1 x Fixing Ring
1 x Bulb holder

Product Features:
* Flat shaped plunger
* Ideal for arcade, commercial & academic projects
* Lens cap can be removed for adding your own legend
* Low cost
* Suitable for heavy use
* A range of compatible microswitches and LEDs are available to purchase separately

Product Dimensions:
Plunger Size: 50mm
Total Diameter Inc. Bezel: 60mm
Bezel Height: 10mm
Mounting Hole Required: 24mm To 28mm

Wiring Information:
These buttons require crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3 mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables

Write a Review

5
Nice size !

Posted by Alex on 5th Sep 2017

Part of a custom arcade panel build, used as a rocket launcher pause button.
5
Good "launch" button

Posted by Cid2Nice on 26th Feb 2017

Perfect for a launch ball button on a pincab.