Product Description
This wiring harness will allow you to connect a 3" trackball unit to a 60 in 1 JAMMA board. The trackball harness has a block connector at one end which connects to the trackball input pins on a 60 in 1 JAMMA board and also has two plastic block connectors on the other end to connect to the x and y axis pins on 3" trackball units that have these.
Please Note: You will need a trackball that has 2 x PCB on. One for X Axis and One for Y Axis to connect - Please check you have the correct trackball before ordering. This harness will not work with SuzoHapp USB trackballs. AMOA style wiring harness trackballs will be fine.
Simple plug "n" play - once connected, the 60 in 1 board will detect the trackball automatically, so you can take control of games like Centipede and Millipede and play them as they were intended to be played with an arcade style trackball.
Please note:
The 60 in 1 JAMMA board has connections for 2 trackballs. If you intend to connect 2 x trackballs, you will require 2 x trackball harnesses.
Product Features:
* Harness to connect 3" trackball to 60 in 1 JAMMA board
* Simply plug "n" play
* No soldering required
* Fitted with block connectors - simple push on to connect