Product Description
The standard 30mm Snap In Style Illuminated Arcade Button features a built-in 5V LED, microswitch with 2.8mm contacts and a convex plunger. This button has 2 x 2.8mm contacts for the built-in microswitch connection and 2 x 2.8mm contacts for the built-in 5V LED connection and can be mounted in many types of control panel with a thickness of up to approx. 4mm. This button is suitable for mounting in a 30mm mounting hole and is available to order in a choice of colours.
Product Features:
* Microswitch contacts (2.8mm)
* Built in 5V LED
* Convex plunger
* Snap in style button
* Easy installation
* Mounting depth approx. 4mm
* Mounts in a 30mm diameter hole
Wiring Information:
Microswitch:
This button requires 2.8mm crimped wires for connection.
1 wire for ground connection and 1 wire for signal connection
LED:
The built-in 5V LED requires 2.8mm crimped wires.
1 wire for positive (+) and 1 wire for negative (-).
A 2.8mm daisy chain harness will be suitable.
Pre-crimped 2.8mm wires and 2.8mm daisy chain harness can purchased here:
1 Metre Long Crimped Wires
Daisy Chain Harness
Button Dimensions:
Mounting hole required: 30mm
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Perfect for my Project
As they are only about 28mm deep (if you bend the pins) they were perfect for my RaspberryPi project (with a 5v level shifter on the LEDs). The button press is registered very quickly by the Pi