RGB LED Strip (5050 SMD, 60/M)
- Condition:
- New
- Shipping:
- Calculated at Checkout
Description
This 16.5 foot roll of RGB LED's is suitable for use with our LED T-Molding housing. To feed this through the LED housing, simply cut one of the block connectors off the end, attach the LED housing pull cord with some electrical tape and pull through.
16.5 foot roll of 5050 RGB SMD LED's, with 60 LED's per meter, for a total of 300 LED's.
PLEASE NOTE: Requires an RGB controller and 12v power supply. These products can be ordered separately.
This is the same type of RGB LED strip used on the Raw Thrills / Betson games such as Jurassic Park and Aliens Armageddon.
Power Requirements: With 60 of the 5050 LED's per meter, this LED strip requires 0.36 Amps per foot to power it, or 1 Amp can power 2.75ft. For example:
6 Amp Power Supply: 16.5 Feet (1 full roll)
12 Volt 6 Amp Power Supply With U.S Plug For LED Strips
8 Amp Power Supply: 22 Feet
12 Volt 8 Amp Power Supply With U.S Plug for LED strips
RGB Controllers:
44 Button RGB Controller
44 Button RGB Controller
Be careful of lower quality options - less expensive strips may be 3528 LED's which are smaller (3.5mm x 2.8mm instead of 5mm x 5mm) or they may be 30 LED's per meter where ours have 60 LED's per meter.
