Replacement Daisy Chain Ground Harness For Mini-PAC
Brand : Ultimarc
- Calculated at Checkout
This daisy chain harness features 32 x female spade connectors with 2.8mm, 4.8mm or 6.3mm terminals & insulated covers and 1 x male spade connector for connecting to the main Mini-PAC harness. The 2.8mm daisy chain harness is commonly used for wiring ground connections for microswitches on Sanwa/Seimitsu arcade buttons. The 4.8mm daisy chain harness is commonly used for wiring ground connections for microswitches on arcade buttons/joysticks. The 6.3mm daisy chain harness is commonly used for wiring single colour LEDs housed in bulb holders. The female spade connectors are spaced out 9cm apart and the total length of the harness is approx 280cm long. If you have a lot of connections to wire, this pre-crimped daisy chain harness can save you a lot of time and effort.
* 32 x female spade connectors
* 1 x male spade connector
* 2.8mm, 4.8mm or 6.3mm terminals
* Female spade connectors approx 9cm apart
* Insulated female spade connectors
* Save a lot of time and effort
* Long continuous harness – approx 280cm
Very good daisy chain
I got this to daisy chain a bunch of buttons together for grounding. The individual wires are a bit short but it did the job.
More than enough connectors, decent cable length and quality
Decent cable quality and length. More than enough connectors, so you can skip a few to ensure the cable reaches all the components. I wired 2 joysticks, 12 player buttons, 2 flipper buttons, p1 start button, p2 start button, 1 coin button.
Still some spare connectors. Much better quality thicker cable than the cheap one it replaced.