Pink Gold Leaf Concave Arcade Button - New Condition - End Of Line Colour

Pink Gold Leaf Concave Arcade Button - New Condition - End Of Line Colour
These pink Gold Leaf buttons are brand new stock, but as the colour is being discontinued, we are selling these at a bargain price to clear. Good chance to grab yourself a bargain - When they're gone, they're gone!

High-Performance Arcade Pushbuttons with integral minature gold-plated leaf switches.

Gold-plated contacts.
No tarnishing nor degradation results in no deterioration in response. The contact leaves and the external connections are fully gold plated.

No Click.
Leaf switch means no clicking micro-switch.

No Plunger Spring.
The body of the button contains no large spring, resulting in a uniquely low actuation force of 45 grams for the entire button.

No Hysteresis.
This is the difference in button depression for the contact close and open points. On these buttons the position is the same, resulting in maximum repeated actuation performance. On micro-switch buttons this "dead" distance can be up to 1.5 mm.

Concave top.
Most serious gamers prefer the classic concave tops over the convex which are commonly used on Japanese low-inertia buttons.

Robust.
The limit stop of the button is supported by the button body, not the switch, so no chance of switch damage owing to over-enthusiastic play!

Compact integral design.
No fiddly assembly after fitting through the panel. Totally enclosed leaf-switch contacts.

Economic.
Despite their performance, these are similar in price to standard arcade buttons and the price is all-inclusive, nothing extra to pay for add-on switch options.

Nut & Thread Fixing.
We have retained the traditional threaded fixing rather than the push-in design of certain other low-inertia buttons, as we believe this gives the most effective permanent mounting in all types of panel up to 19mm (3/4 in). This button will fit securely in a 28mm mounting hole.

Connection
These pushbuttons have 2.8mm connector tags. 
For I-PAC hand-wired connections, you will need to use wires with 2.8mm crimps.
For Mini-PAC pre-made harnesses, select the 4.7mm types, these fit satisfactorily.