Product Description
This MOSFET stereo sound amplifier and speaker & grill set is ideal for various arcade machine projects. This kit includes everything you need for adding speakers and volume control to your project. The amplifier requires 12V, which can be taken from a JAMMA power supply or a spare molex connector on a PC Power supply.
What's Included:
1 x 22 Watt MOSFET Stereo Sound Amplifier
1 x Power Cable
1 x 3.5mm Jack To Twin Male RCA Phono Plugs
2 x Budget 5W 8Ohms Speakers (4 Inch)
4 x 4.8mm Crimped Wires
2 x Speaker Covers
Power Cable:
We sell a compatible power supply for this amplifier here:
Power Adapter For Hi-Fi & Mosfet Sound Amplifiers
Amplifier:
This stereo MOSFET sound amplifier is suitable for connecting up to 2 speakers. Each stereo sound amp features treble, bass, balance & volume controls (volume dial flashes red & blue when powered on) and is supplied with a power cable and an audio cable for easy connection.
Connections:
Input Connections
Power: DC 12V 2A
Audio: 2 x RCA audio inputs
Output Connections
2 x Speaker terminals
(1 x Signal & 1 x Ground for each speaker)
Dimensions:
Stereo Amp Unit
Length: 15.5cm (Including mounting brackets)
Width: 10cm (Including knobs)
Height: 4cm
Specifications:
580W Max
R.M.S. 22 Watt Impedance 4Ω
Input Power: 12V-2A
S/N Ratio: >80dB
T.H.D. Rated RMS Power: >0.1% At 1Khz
Speaker Impedance: 4-16Ω
Frequency: 20Hz-20kHz
Philips Power Amplifier Chip Inside
Speakers:
Speaker for use in arcade video game machines. This speaker is 4 Inches (10.2cm) in diameter. It features 8 Ohms & 5 watts.
Product Dimensions:
* Speaker Diameter: 10cm
* Magnet Diameter: 4.5cm
* Metal Housing: 10cm x 10cm
* Depth: 3.4cm
* Mounting Holes: Approx. 8cm apart
Product features:
* 8 Ohm - 5W
* 4 Inch size
Speaker Covers (Plastic Option):
5" speaker grill with 3 mounting holes, ideal for arcade machine projects/builds.
Product features:
* 5" diameter
* 3 mounting holes
Speaker Covers (Metal Option):
5.5" speaker cover with metal grill, ideal for arcade machine projects/builds. The 4 screw holes are spaced approx. 8cm apart (measured from centre to centre of screw holes)
Product features:
*5.5" diameter
*Grill covers screw heads
Product Videos
Custom Field
Product Reviews
9 Reviews Hide Reviews Show Reviews
-
12V Mosfet Stereo Amplifier Kit
A fantastic kit for building a DIY arcade cabinet at a very reasonable price.
-
It gots the job done
It includes everything needed for a basic installation on your cabinet. The quality is not excellent but it wasn't in old arcades anyway. moreover, it has more than enough power.
-
Does its job
Quality - price is very good.. Too bad it does not come with a 12 2A transformer.
-
Great product good sound
Bought this for my BarCade, and was very pleased with it. The sound from the two speakers is great. It was very easy to install.
-
Do the job
Quality/price is excellent
-
Ample Amp!
This little kit provides ample volume and sound quality for playing old arcade games. I had had no problems installing it or with interference etc just remember to keep all your sound system cabling away from power cables!
-
well...
The kits is nice, but it has a big flaw it doesnt come with a 12v 2a transformer it only brings to cables that you have to conect/solder to something that gives you 12v power so you´ll problably have to buy a 12v 2a transformer...
-
Great performance at a nice price!!
I've used these on four different machines, they work a treat. Easy to set up, good quality and nice performance.
-
Not bad
The speakers and the metal grill looks good, the amp feels pretty cheap but it's not meant to be seen, so that doesn't matter. There is however quite a bit of hum introduced to the audio. Not sure it's grounded that well. Also, no screws come with the kit and I've no idea what ones to use, either, which is a pain in the ass. A shame some screws couldn't be included, or suggestions as to what diameter the should be,