KOWAL™ 1mm Nylon Oversize Actuator for Sanwa JLF Series Joysticks
Brand : KOWAL
- Calculated at Checkout
The KOWAL™ 1mm oversize actuator is manufactured from hard wearing Nylon and is intended to be used as a replacement actuator on the Sanwa JLF series of joysticks. Once fitted, you will benefit from a shorter throw and faster engagement of your joystick, which will result in improved gameplay. The KOWAL™ 1mm oversize actuator is ideal for fight stick builders and those customers who like modding fight sticks for improved performance. The KOWAL™ 1mm oversize actuator has been tested with square and octagonal restrictor plates and engages the stock switches on the Sanwa JLF series of joysticks consistently.
The KOWAL™ 1mm oversize actuator is compatible with all the Sanwa JLF series of joysticks.
Installing the KOWAL™ 1mm oversize actuator is very straight forward.
1/ Take your JLF series joystick and using a small flat head screwdriver, gently prise off the C Clip on the bottom of the joystick.
2/ Lift off the stock actuator. Replace this with the KOWAL™ 1mm oversize actuator and gently push down.
3/ Using a small pair of pliers, gently grip the C Clip and with a gentle squeeze, the C Clip will snap back into place.
In the diagram above:
Neutral Zone (area where actuator doesn't touch switches) is indicated in BLUE.
Dead Zone (area where actuator presses begins pressing switch) is BLACK.
Activation (are where switch is pressing down) is RED.
KOWAL™ actuator retains the neutral zone. This allows switches to perform normally.
This perfect if you want less dead zone in your Sanwa or Hori joystick you want to make easier fast moves
Made a huge difference when using octo gate. I used to miss diagonal inputs when doing circular motions a lot. This little thing helps massively and there are no downsides. I thought it would introduce accidental inputs. None of that.
Has improved my inputs significantly and does exactly what it is supposed to. The durability also seems to fit, as there has been no wear and tear so far.
Cost Effective Item that Does Give You an Edge !!!
Getting this has become a standard now.
Insalled easily and works well with round or square gate. Dumpens the feel of direction for octagonal gate, since it's wider and doesn't fit into corners.
Fits perfectly in the Hayabusa joystick
The effect of this is simply to shorten the thorw of the stick.
This means it's going to be personal preference of course, and you may find pros and cons depending on the genre of game you're playing... I'm using this in addition to a 4lb spring, and I find it to be extremely responsive and accurate. Much nicer feel than the loose feel of the unmodified JLF.
Value for money wise, it's a no brainer!! Give it a try