Product Description
The KOWAL™ 1mm oversize actuator is manufactured from hard wearing Nylon and is intended to be used as a replacement actuator on the Sanwa JLF series of joysticks. Once fitted, you will benefit from a shorter throw and faster engagement of your joystick, which will result in improved gameplay. The KOWAL™ 1mm oversize actuator is ideal for fight stick builders and those customers who like modding fight sticks for improved performance. The KOWAL™ 1mm oversize actuator has been tested with square and octagonal restrictor plates and engages the stock switches on the Sanwa JLF series of joysticks consistently.
Compatibility:
The KOWAL™ 1mm oversize actuator is compatible with all the Sanwa JLF series of joysticks.
Installation:
Installing the KOWAL™ 1mm oversize actuator is very straight forward.
1/ Take your JLF series joystick and using a small flat head screwdriver, gently prise off the C Clip on the bottom of the joystick.
2/ Lift off the stock actuator. Replace this with the KOWAL™ 1mm oversize actuator and gently push down.
3/ Using a small pair of pliers, gently grip the C Clip and with a gentle squeeze, the C Clip will snap back into place.
Dead Zone:
In the diagram above:
Neutral Zone (area where actuator doesn't touch switches) is indicated in BLUE.
Dead Zone (area where actuator presses begins pressing switch) is BLACK.
Activation (are where switch is pressing down) is RED.
KOWAL™ actuator retains the neutral zone. This allows switches to perform normally.
Product Videos
Custom Field
Product Reviews
33 Reviews Hide Reviews Show Reviews
-
Essential purchase for my JLF
Where fractions of a second count, this mod is probably essential. You will want to invest in a 2lb &/or 4lb spring because the stock Sanwa spring is too light. Be aware that switch activations on the opposite side are more likely with heavier handles (like the Aluminium ball top) as the stick returns to centre because of the smaller deadzone. Once I got used to it, with the right spring and handle top combo, response times greatly improved.
-
Cheap Upgrade
Combined this with a 4lb spring on my otherwise stock JLF and found that my inputs are now much more precise, it seems to be helping very much in transitioning from Street Fighter to Tekken as a substitute for buying a whole new Korean stick.
-
Great product.
Cracked open my Hori Arcade Pro 4 and installed this along with a KOWAL Hayabusa Octopus Octagonal Restrictor Gate. Instantly reduced the dead zone. Took a little getting used too but was worth it. Next step is the 2lb spring.
-
Cheap and effective way to improve feel and execution
I know it's a few quid for a tiny piece of plastic, but it really does make a difference to feel and pulling off moves. I used this to modify a JLF that I'd installed in a case, and I really like the difference. In conjunction with a 2lb spring, this is pretty much where it's at.
-
Amazing for shooters!
I thought that virtsticks were great for years, but this actuator with a JLF makes shmup control incredibly accurate! Wonderful product!
-
Because every millisecond counts
Remember this : execution is one of the most important part in fighting games. I bought this toghether with the Kowal octogonal restrictor gate for Hayabusa stick. I didn't install it at 1st but as the aluminium ball top was heavier, the stick used to bounce a lot and my inputs were false. I decided to twist 2 springs together but I felt I will have to struggle a lot to have my input direction. I remembered I had the oversize actuator so I decided to put it in place of the original. The result is a harder stick (you can also buy a 2 or 4lb srping) BUT the click comes as soon as you push it (the dead zone is really reduced). No more hard struggle. Every imput is performed quicker. Rekka moves are coming out perfectly because the timing is now good, and I can finally perform the shorcut for quarter circle moves + super/creative art. Comboing in KOF XIV ans SFV is now a lot easier. No more frustration. This is a must buy for people who have difficulties with execution, shaky hands problems as a great add with a harder spring and the restrictor gate.
-
Makes the stick more responsive
Mounted on a Sanwa JLF, it makes the stick slightly more responsive and it shortens the dead zone. A nice mod at a low price. Recommended.
-
Great!
I'm a noob and installing this on my Hori Hayabusa V is easy! Though I can't tell the difference as of now since I also installed the Kowal Octopus Octagonal gate.
-
Actuator Actually works!
Really easy to fit and awesome results... So responsive to commands now. Definitely a new level of control for fight games.