This illuminated bat top arcade joystick features a fixed bat top handle with bubble design and comes supplied with 1 x dust cover, 1 x shaft cover, 1 x cable for connecting to a 12V power supply and 1 x 5-pin cable for connecting the joystick (Up, Down, Left, Right, GND). The restrictor plate on the joystick can be set to 2, 4 or 8 way by simply undoing the screws and sliding to the required position. The bat top style handle features cool looking bubbles inside the handle and the handle is fixed to the shaft of the joystick so can not be removed. This illuminated bat top joystick is lit up by LEDs on the PCB, which is located underneath the mounting plate. The LEDs shine up through the transparent shaft cover, which gives the bat top handle an awesome glow.
Illuminating the joystick:
To illuminate this joystick, simply connect the included cable (red/black) to the PCB and connect the bare ends to a 12V power source and ground. 12V can be taken from a spare molex connector on a PC power supply (Yellow = 12V, Black = GND)
Mounting Plate: Length 97mm x Width 64mm
Shaft height: 78 mm (From top of mounting plate to top of handle)
* Includes fixed bat top handle
* 2/4/8 way movement
* PCB with LED illumination
* Cool looking joystick
* Includes cables to connect
1 Review Hide Reviews Show Reviews
Very satisfied, the manufacturer has improved the setting of the lever with respect to previous models. A ten for arcade world UK, capable of solving possible problems!