Product Description
This 12-way rotary joystick upgrade kit is compatible with the JLW-TM-8 joystick and Servostik joystick (BALL TOP VERSION ONLY)
PLEASE NOTE: This rotary joystick upgrade kit is NOT compatible with the Servostik BAT TOP version
Features:
• Ikari Warriors style emulation.
• Rotary movement issues a keystroke or gamepad button press for each of the 12 clicks.
• Character for clockwise/anticlockwise can be changed to any keyboard key or button
• Length of the “pulse” of the key can be adjusted
• Settings retained by the interface.
• 4-way/8-way directional performance of original joystick is unaffected. Kit adds rotary capability.
Kit Contents:
• USB board with switch and cable
• Coupling
• Replacement handle. (Visible handle length: 48mm BALL TOP)
• Spacer washers
• Switch mounting plate
• Pillar
• Cable ties
• Allen key
Installation
https://www.ultimarc.com/12wayrotary.pdf
Remove c clip from original handle, lower end. NOTE: Spring loaded parts take care! Install replacement handle, fit TWO spacer washers under c clip
Fit switch/PCB to mounting plate using nut. Note this can be fitted either way round relative to the plate, select the best way for your physical panel layout.
Fit collar onto handle and switch. Tighten screws using the supplied allen key.
When installing the joystick to the panel, the pillar can be fixed in several ways, for example:
• Female mounting using an extra 5mm screw (not supplied)
• Female mounting using one of the joystick-panel mounting screws
• Male mounting into one insert of the Ultimarc joystick mounting kit
• Male mounting into a different faceplate hole from the mounting using 5mm nut (not supplied)
The mounting plate may need to be bent slightly downwards so it always is engaged with the pillar. Secure USB cable using the 2 holes in the PCB and cable ties, to avoid flex on the USB connector.
Configuration
Setup is done using the WinIPAC program which can be downloaded from
www.ultimarc.com/download.html
Note: If you also have an I-PAC board connected, this will need to be unplugged temporarily for the program to recognise the 12-way board. The program allows setting of the clockwise and anti-clockwise clicks to any keyboard key or game controller button. On the Config tab, there is a setting for “Switch Debounce”. This can be set to one of 4 settings. On this interface, this controls the length of the key “pulse” issued on each click. Some slower applications may require a longer pulse.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
ikari warriors must have
fitted these onto both my joysticks and I'm so glad I did. Now I play ikari warriors series and midnight resistance and the memories flood back