I-PAC Pac-Link Adapter For Xbox 360 And PS3

Description

The Pac-Link (Xbox360/PS3 adapter) is ideal for anyone wanting to build an arcade machine or control panel and connect joysticks and buttons to Xbox360 or PS3 consoles. This adapter plugs onto the I-PAC2 (2015 version) keyboard encoder and you can connect up to 2 adapters on a single I-PAC2 board.

Please Note:
This adaptor works ONLY with the 2015 I-PAC 2 board which has the new high-speed Pac-Link Expansion Interface

Features:
* Operates in either Xinput/Xbox 360 mode or PS3 mode. Switchable on the adaptor
* Uses a high-speed interface from the I-PAC. No lag
* Works on the Xbox 360 without the need for a wired controller to be cross-plugged unlike many other adaptors
* Operates in 4 control modes which can be switched on the fly from the control panel
* One I-PAC 2 board supports one or two adaptors

Installation:
The I-PAC 2 board needs to be connected to a PC and the WinIPACV2 program run, and select the "config" tab, then check the "Enable Expansion Interface" check box and click "apply".

Connect the adaptor(s) as shown in the picture below. The wire colors RED and BLACK are marked on the board on the P1 side. The P2 side connects the same way.

Connect the USB cables to the console (or PC for Xinput Mode). Note you can connect the board to a console AND to a PC using its standard USB cable at the same time.

If using on a PC in Xinput (Xbox360) mode, install the Xbox 360 Controller Drivers from Microsoft.

Depending on your panel layout and requirements you may need to change the default control mappings. The steps to do this are as follows:
* Decide which type of console or Xinput control you need to assign or move
* Look at the tables below to find this control, and make a note of the keycode which generates it.
* Assign this keycode to the pin on the I-PAC which the physical control is connected to. This is done using the WinIPACV2 program.

Hotkeys For Switching Modes:

Switch to Digital Mode	Start1/P1 Down*	P
Switch to Left Analog Mode	Start1/P1 Left*	Enter
Switch to Right Analog Mode	Start1/P1 Right*	Tab
Switch to 2 into 1 Mode	Start1/P2 Down**	F12

* These are I-PAC shift functions, ie hold down P1 Start
** This is not part of the default I-PAC codeset. The function is suggested only and can be programmed into the I-PAC if needed.

Digital Mode:

		PLAYER 1		PLAYER 2
PS3 Control	X-Box/Xinput Control	I-PAC Button	Keyboard Char	I-PAC Button	Keyboard Char
D-Pad Right	D-Pad Right	P1 Right	Right	P2 Right	G
D-Pad Left	D-Pad Left	P1 Left	Left	P2 Left	D
D-Pad Up	D-Pad Up	P1 Up	Up	P2 Up	R
D-Pad Down	D-Pad Down	P1 Down	Down	P2 Down	F
Start	Start	P1 Start	1	P2 Start	2
Select	Back	Start1/Up*	P		F11
Left Rear Button 1	Button A	P1 SW 1	L-Ctrl	P2 SW 1	A
Button Square	Button B	P1 SW 2	L-Alt	P2 SW 2	S
Button Triangle	Button X	P1 SW 3	Space	P2 SW 3	Q
Right Rear Button 1	Button Y	P1 SW 4	L-Shift	P2 SW 4	W
Button X	Black	P1 SW 5	Z	P2 SW 5	I
Button O	White	P1 SW 6	X	P2 SW 6	K
Left Rear Button 2	L-Trigger	P1 SW 7	C	P2 SW 7	J
Right Rear Button 2	R-Trigger	P1 SW 8	V	P2 SW 8	L
L thumb click	L-Analog Click	Coin 1	5	Coin 2	6
R thumb click	R-Analog Click		7		8
Home			F1		F2

Left Or Right Analog Modes:

		PLAYER 1		PLAYER 2
PS3 Control	X-Box/Xinput Control	I-PAC Button	Keyboard Char	I-PAC Button	Keyboard Char
Analog Right	Analog Right	P1 Right	Right	P2 Right	G
Analog Left	Analog Left	P1 Left	Left	P2 Left	D
Analog Up	Analog Up	P1 Up	Up	P2 Up	R
Analog Down	Analog Down	P1 Down	Down	P2 Down	F
Start	Start	P1 Start	1	P2 Start	2
Select	Back	Start1/Up*	`(key below ESC)		F11
Left Rear Button 1	Button A	P1 SW 1	L-Ctrl	P2 SW 1	A
Button Square	Button B	P1 SW 2	L-Alt	P2 SW 2	S
Button Triangle	Button X	P1 SW 3	Space	P2 SW 3	Q
Right Rear Button 1	Button Y	P1 SW 4	L-Shift	P2 SW 4	W
Button X	Black	P1 SW 5	Z	P2 SW 5	I
Button O	White	P1 SW 6	X	P2 SW 6	K
Left Rear Button 2	L-Trigger	P1 SW 7	C	P2 SW 7	J
Right Rear Button 2	R-Trigger	P1 SW 8	V	P2 SW 8	L
L thumb click	L-Analog Click	Coin 1	5	Coin 2	6
R thumb click	R-Analog Click		7		8
Home			F1		F2

2 Into 1 Mode (One player uses entire 2 player panel)

	PLAYER 1
PS3 Control	X-Box/Xinput Control	I-PAC Button	Keyboard Char
L-Analog Right	L-Analog Right	P1 Right	Right
L-Analog Left	L-Analog Left	P1 Left	Left
L-Analog Up	L-Analog Up	P1 Up	Up
L-Analog Down	L-Analog Down	P1 Down	Down
R-Analog Right	R-Analog Right	P2 Right	G
R-Analog Left	R-Analog Left	P2 Left	D
R-Analog Up	R-Analog Up	P2 Up	R
R-Analog Down	R-Analog Down	P2 Down	F
Start	Start	P1 Start	1
D-Pad Right	D-Pad Right	P2 SW 1	A
D-Pad Left	D-Pad Left	P2 SW 2	S
D-Pad Up	D-Pad Up	P2 SW 3	Q
D-Pad Down	D-Pad Down	P2 SW 4	W
Select	Back	Start1/Up*	`(key below ESC)
Left Rear Button 1	Button A	P1 SW 1	L-Ctrl
Button Square	Button B	P1 SW 2	L-Alt
Button Triangle	Button X	P1 SW 3	Space
Right Rear Button 1	Button Y	P1 SW 4	L-Shift
Button X	Black	P1 SW 5	Z
Button O	White	P1 SW 6	X
Left Rear Button 2	L-Trigger	P1 SW 7	C
Right Rear Button 2	R-Trigger	P1 SW 8	V
L thumb click	L thumb click	Coin 1	5
R thumb click	R thumb click		7
Home			F1