Categories

I-PAC 4 And Wiring Kit

(1 review) Write a Review
€81.46
(Inc. VAT)
€67.88
(Ex. VAT)
Condition:
New
Shipping:
Calculated at Checkout

Description

ipac-logo.jpg

This I-PAC4 and wiring kit is ideal for those customers who are building a 4 player arcade machine. The I-PAC4 board has 56 inputs, so you can connect up to 4 joysticks and 40 arcade buttons. There is no soldering required when using this kit and you just simply screw the pre-crimped wires into the screw terminals on the I-PAC4 board.

Connect the crimped ends of the 1 Metre long wires to the NO (Normally Open) microswitch terminals on your joysticks and buttons, strip a small section of the plastic coating off the other end of the wires and simply screw these into the corresponding screw terminals on the I-PAC4 board. Then connect the daisy chain ground harness to the COM (Common Ground) microswitch terminals on your joysticks and buttons.

If you have any spare ground connections left, you can either cut these off, or use them for extra span to help the daisy chain harness reach the ground terminal on the I-PAC4 board. Once this is complete, plug your board into your PC and once it has been recognized, you are ready to go.

Crimp sizes:
2.8mm - This size crimp is mainly used for Sanwa & Seimitsu buttons.

4.8mm - This size crimp is mainly used for standard arcade buttons E.g. Happ, IL & Classic buttons

4.8mm/2.8mm - This option allows you to use standard joysticks (Happ, IL etc...) with Japanese buttons (Sanwa or Seimitsu)

6.3mm - This size crimp is mainly used for microswitches that have the larger 6.3mm terminals.


What's included with the 2.8mm - 4.8mm - 6.3mm options?
1 x I-PAC 4 Keyboard Encoder
1 x Pack Of 4 PCB Feet

2 x Insulated Daisy Chain Harness With 32 Crimp Connections
56 x 1 Metre Long Insulated Crimped Wires



What's included with the 4.8mm/2.8mm option?

1 x I-PAC 4 Keyboard Encoder
1 x Pack Of 4 PCB Feet

3 x Insulated Daisy Chain Harness With 32 Crimp Connections
      (2 x 2.8mm daisy chain & 1 x 4.8mm daisy chain)
56 x 1 Metre Long Insulated Crimped Wires
      (40 x 2.8mm wires & 16 x 4.8mm wires)

 

Reviews

  • 5
    Quick and Simple

    Posted by Warren Chandler on 13th Aug 2020

    Easy to set up and an easy solution for those of you having the Windows 10 controller ID swapping problems. Works a treat and I can finally leave my MAME install to run as it should.

Customers Also Viewed

I-PAC 2 And Wiring Kit

I-PAC 2 And Wiring Kit

This kit is perfect for customers who are building a cocktail arcade machine as the wires in this ki

€48.82 - €52.15 (Inc. VAT)
€40.69 - €43.46 (Ex. VAT)

I-PAC Ultimate I/O Interface

Ultimarc

I-PAC Ultimate I/O Interface

I-PAC ULTIMATE I/O Advanced PC interfaceFor Arcade Buttons, Joysticks, U-Trak Trackball, SpinTrak

€75.92 - €102.56 (Inc. VAT)
€63.26 - €85.47 (Ex. VAT)

Sanwa JLF-TP-8YT Ball Top Joystick

Sanwa Denshi Co.

Sanwa JLF-TP-8YT Ball Top Joystick

The Sanwa JLF-TP-8YT is a high quality joystick, manufactured in Japan by Sanwa Denshi Co. This is t

€25.31 - €31.95 (Inc. VAT)
€21.09 - €26.62 (Ex. VAT)