Hi-Fi Stereo Sound Amplifier Kit For Arcade Machine Projects
- Calculated at Checkout
This stereo Hi-Fi sound amplifier and speaker & grill set is ideal for various arcade machine projects. This kit includes everything you need for adding speakers and volume control to your project. The amplifier requires 12V, which can be taken from a JAMMA power supply or a spare molex connector on a PC Power supply.
1 x 180 Watt MOSFET Stereo Sound Amplifier
1 x Power Cable
1 x 3.5mm Jack To Twin Male RCA Phono Plugs
2 x Budget 5W 8Ohms Speakers (4 Inch)
4 x 4.8mm Crimped Wires
2 x Speaker Covers
We sell a compatible power supply for this amplifier here:
Power Adapter For Hi-Fi & Mosfet Sound Amplifiers
This stereo Hi-Fi sound amplifier has a 180W output and features treble, bass & volume controls (volume dial lights up red when powered on). This sound amplifier is supplied with a power cable and an audio cable and has an On/Off power button on the front of the unit.
There is a 3.5mm audio jack input and 2 x RCA audio inputs on the back of this sound amplifier, which allows you to connect an MP3 Player, CD Player or PC/Laptop. This Hi-Fi 180W sound amplifier is also suitable for various arcade machine projects.
Power: DC 12V 2A
Audio: 2 x RCA audio inputs
Audio: 1 x 3.5mm Audio Input
2 x Speaker terminals
(1 x Signal & 1 x Ground for each speaker)
Stereo Amp Unit
Length: 15cm (Including mounting brackets)
Width: 10cm (Including knobs)
4 - 8
100Hz - 20KHz
Speaker for use in arcade video game machines. This speaker is 4 Inches (10.2cm) in diameter. It features 8 Ohms & 5 watts.
* Speaker Diameter: 10cm
* Magnet Diameter: 4.5cm
* Metal Housing: 10cm x 10cm
* Depth: 3.4cm
* Mounting Holes: Approx. 8cm apart
* 8 Ohm - 5W
* 4 Inch size
Speaker Covers (Plastic Option):
5" speaker grill with 3 mounting holes, ideal for arcade machine projects/builds.
* 5" diameter
* 3 mounting holes
Speaker Covers (Metal Option):
5.5" speaker cover with metal grill, ideal for arcade machine projects/builds. The 4 screw holes are spaced approx. 8cm apart (measured from centre to centre of screw holes)
*Grill covers screw heads
What more can you ask for, works great!.
I got a plug to go with it for easy install!
Nice unit, provides a nice loud and bassy sound to my cabinet project. I have them on quite low but they are still more than loud enough to have volume control.
A tiny hiss when they aren't being used, but unnoticeable in the general scheme of things and certainly once you start playing.
If your starting out first time cabinet builder then this will work and is relatively cheap. However, it does not come with a power transformer, so you will have to source additional power components which is a hassle and significant extra cost on something so cheap. Its an OK place to start but i would not buy it again.
I can NOT recommend this product - it's simply not good enough. I don't know how this product is getting 4 and 5 STARS?? The wires are not real speaker wires and are SOO thin and fragile that that they cannot push any volume through and they are guaranteed to to cause problems later on. Any descent arcade build deserve a good sound solution and THIS is NOT IT
I was struggling with a pair of old PC speakers I'd taken apart but ultimately just decided to bite the bullet and get this. It works perfectly and now my cab makes a lot of noise!
Spot on for what I needed for my retro arcade build, not used it at full whack but so far i've been really pleased and would highly recommend.
perfect items, perfect seller !
This little amp and speaker setup is exactly what you'd expect, it won't blow you eardrums but you will get the appropriate amount of sound. I was enclosing the two speakers in a box with holes on top of my bartop arcade and they produced the right amount of bass without going overboard, the amount of static you get through the amp is as expected but a bit of volume tweaking and you're sorted.
For a simple cheap solution these are great.
There's plenty of volume and the sound is crisp and clear.