Gold Leaf RGB Arcade Button
Brand : Ultimarc
- Calculated at Checkout
This Gold Leaf RGB arcade button is a high-performance push button, which features an integral miniature gold-plated microswitch with 2.8mm terminals. Each gold leaf RGB arcade button comes pre-wired (50cm long) for direct plug-in to the PacLED64 or I-PAC Ultimate I/O boards.
IMPORTANT: The LEDs do not have current-limiting resistors so MUST be connected to one of the above controllers which have current-controlled outputs.
No tarnishing nor degradation results in no deterioration in response. The contact leaves and the external connections are fully gold plated.
The moving part of the button is ultra-light and only 10mm deep, unlike other types where the plunger extends the full depth of the button.
Leaf switch means no clicking micro-switch.
No Plunger Spring
The body of the button contains no large spring. This results in a uniquely low actuation force of 45 grams for the entire button.
This is the difference in button depression for the contact close and open points. On these buttons the position is the same, resulting in maximum repeated actuation performance. On micro-switch buttons this "dead" distance can be up to 1.5 mm.
Most serious gamers prefer the classic concave tops over the convex which are commonly used on Japanese low-inertia buttons.
The limit stop of the button is supported by the button body not the switch so no chance of switch damage owing to over-enthusiastic play!
Compact integral design
No fiddly assembly after fitting through the panel. Totally enclosed leaf-switch contacts.
Despite their performance these are similar in price to standard arcade buttons and the price is all-inclusive, nothing extra to pay for add-on switch options.
Nut & Thread Fixing
We have retained the traditional threaded fixing rather than the push-in design of certain other low-inertia buttons as we believe this gives the most effective permanent mounting in all types of panel up to 19mm (3/4 in).
At last full-color RGB lighting without any performance sacrifice!
RGB version has pre-wired dual internal RGB LEDs with 500mm wiring for direct plug-in to our PacLED64 or I-PAC Ultimate I/O boards for dynamic all-color control.
Connecting your pushbuttons
These pushbuttons have 2.8mm switch connector tags
For I-PAC hand-wired connections we sell packs of 100 crimp connectors
For Mini-PAC pre-made harnesses, select the 2.8/4.7mm harness version. This version has 2.8mm on pushbutton connections (excluding Start1,2) and 4.8mm on all other connections
It does not matter which tag connects to GND and which connects to the interface
Really good buttons and very easy to install in PacLED64. If you want quiet buttons with rgb then these are the buttons for you. Then I would also like to thank Arcadeworlduk for the fast delivery.