This flat pack pinball arcade cabinet kit is manufactured from 18mm MDF, features a black MDF finish and includes a plexi set for playing area and DMD area. The monitor play field area provides ample room for a monitor of up to 27” and there is also a pre-cut hole in the back of the cabinet for those customers who want to fit an inlet switch. This pinball cabinet kit is supplied in flat pack form for self assembly and all fixings are included. If you have ever dreamed of owning a pinball machine but the price has always been too high, you can now achieve your dream by building your own !
* Flat pack pinball arcade cabinet kit
* Plexi set included
* Can be ordered with or without legs
* All fixings and instruction sheet included
* Supplied in flat pack form for self assembly
Pinball Leg Information:
Colour: Gloss black
Each leg measures: Length 74cm (leveller retracted) to 79cm (leveller fully extended)
4 x Steel Legs
4 x Brackets / Back Plate
4 x Leg Levellers
8 x 8 Carriage Bolts with Nuts
24 x 4mm x 15mm Screws
Playfield: compatible with up to a 27” monitor or TV with the following maximum OUTER dimensions of: 700mm (length) x 442mm (width)
Backbox: compatible with up to a 22” monitor with the following maximum OUTER dimensions: 560mm wide x 330mm high
The viewable area is 120mm (h) x 340mm (w)
This can be adjusted or removed if requested.
870mm (overall height excluding legs)
Main Body - 346mm (height) x 480mm (width) x 900mm (length)
Main Body and Back Box - 870mm (height) x 598mm (width) x 900mm (length)
Required to Assemble:
3mm & 5mm Drill Bit and Drill
Compatible with VESA 75mm and 100mm square hole pattern and 200mm x 100mm.
Screen - Maximum Size
Compatible with monitors up to 27"
The above is for guidance only. We strongly recommend measuring the outer measurements of the monitor to ensure they do not exceed the following dimensions:
700 mm (h) – Maximum OUTER height
442 mm (w) – Maximum OUTER width
There are two 10cm holes cut out on the base of the cabinet. These are for ventilation and can be left open or fitted with fans as required.
Compatible with 28mm and 30mm buttons, including Sanwa, SuzoHapp, Gold Leaf, Industrias Lorenzo, Seimitsu, Samducksa and QanBa.
Power Supply Compatibility
There is a hole located in the base of the cabinet to accommodate an inlet socket switch if required. Alternatively, cables can be fed through this hole.
Number of button holes
4 x Player button holes (2 per side)
1 x Release/start hole
4 x Option/navigation button holes
The speaker holes are designed to fit 3.3" speakers.
Compatible with 3/4” (19mm) T-Molding, that fits a 1/16” (1.58mm) slot. We recommend purchasing 20ft (6m) of T-Molding to complete the pinball kit.
T-Molding can be purchased separately here: T-Molding
1 Review Hide Reviews Show Reviews
Quality mid-size cabinet
Quality is good, cuts are good, MDF is 18 and you have everything you need for it: modesty blocks, screws, bolts with nuts. Also instructions are good and clear. I'm very happy with it!