This is a basic mechanical acceptor. The coin is measured for diameter, width and metal content. If the coin is accepted it passes a microswitch with Common, Normally Open and Normally Closed contacts, which in turn will give a credit to your game. Ideal for home arcade cabinet builds or as a replacement mech for older machines. This mech can be used for a wide variety of applications that require a coin input to operate and it is very reliable compared to the more advanced coin mechs.
Some of our customers have used these for operating snooker table lights, model trains, public toilets and kiddie rides.
The mech will also connect to a Mini-PAC or I-PAC. It is very easy to install - just take the coin signal wire from your appliance and connect to the NO (Normally Open) microswitch terminal on the back of the mech. Connect the ground wire to the CO (Common Ground) terminal on the microswitch and that's it! It is an ideal mech for first time cabinet builders and more experienced arcade cab builders. This is the same mech that many of the arcade machines in the 80's used. Give your home arcade cabinet a real retro feel and turn your machine into a giant money box at the same time!
The 10p version of this coin mech IS now compatible with the newer nickel-plated steel version of 10p coins that were introduced from early 2013 onwards AND older 10p coins (Pre-2013)
Flat 23mm Tokens:
More information on the tokens for the flat token mech can be found here
Grooved 27.8mm Tokens:
More information on the tokens for the grooved token mech can be found here
We also sell a credit board that will allow this mech to accept multiple coins for a credit - Credit Board For Coin Mechanism
Ideal for a wide range of applications.
Reject button and reject outlet.
Bounce resistant coin micro switch.
Anti stringing protection.
Very easy to install.
Connects to Mini-PAC and I-PAC.
Can be used for various commercial purposes.
These have been used to operate kiddie rides, snooker table lights, public toilets and arcade machines etc.
Can I connect this to a Mini-PAC or I-PAC?
YES - It will connect to both of these.
Is this mech ideal for my PC arcade machine?
YES - This is ideal for a PC arcade machine.
Will this mech give me credit for games in MAME?
YES - It will work great for MAME.
11 Reviews Hide Reviews Show Reviews
I bought this to replace some electronic coin mechs that had failed. This is so robust and solid. Its only been installed 2 weeks, but I think it will last a lifetime. Simple microswitch output. Great item.
Having switched from the cheap, plastic, programmable mechanisms to these, I'll never go back. These are pure mechanical and don't fail. There is no tedious set up, simply hook the 2 micro switch points to your controller/encoder and that's it, no power required. They're very well made, all steel, so I can't see these even failing after heavy use. Highly recommend.
i used the 20p coin mech and wired it up to my raspberry pi zero via the GPIO, it works great with mame arcade games in retropie. simple but effective.
We required a one pound coin acceptor for a timed heater at our club and originally purchased an electronic version, after three replacements however we changed to your mechanical version. Far superior product, would only consider using these in future projects.
The coin mech was purchased to replace a mechanical Coin Controls mech of a similar shape and size. and the new mechs shape ,size and look is obviously designed to mimic the Coin Controls design. However the fixing holes of the new coin mech do not align exactly and two have to be drilled out to fit. The most frustrating aspect is the new mech has the microswitch terminals stuck out at right angles to the side which does not fit within the standard case surround. The original Coin Controls mech has the microswitch fitted underneath the mech with the terminals to the rear which is a far better design. I have been able to make the new mech fit but it requires additional work.
When people were saying you won't be able to upgrade a 1978 Bell Fruit pub machine. I ordered a 10p mechanism and then after that worked a 20p. Excellent service and easy to fit and wire up.
Absolutely a must have for your cabinet. Work so great and it is a robust piece. Ordered for 0,50€ coins. Work flawlessly. Thanks
as the headline.. couple of wires and its all go.. very slight adjustment to the coin ring collector on reject but nothing to really write about. Got this for a Defender desktop I made and works perfect.
Got the 20p version for my mame cab and works flawlessly would recommend.
The best thing about these mechs is really that there's no motors, no circuit boards or complex moving parts, and an all metal construction with a simple switch so there is less that can go wrong. You can also alter the mech to take any coin that isn't magnetic. The downside is actually not to do with these mechs but the state of our british coinage in which coins that used to be non magnetic are now magnetic (such as the 5p and 10p coins produced 2012 onwards. Further down the line I suspect all our coins will be mild steel and will not be suitable for these mechs. Also since mild steel is a lesser density the coin thickness changes which presents problems when your coins are a mix of old and new. Get used to using tokens rather than real money coins would be my advice.