Product Description
X -> P
Wingman XE, support Xbox 360 / Xbox One even Xbox Elite Series 2 controllers on PS4.
Xbox Arcade Stick? Sure! Xbox Adaptive Controller? We didn't miss it!
Introduction
Support Xbox 360 / Xbox One / Xbox Elite / Xbox Elite Series 2 controller and arcade stick use on PS4. It got faster reaction speed than old model, no matter wired or wireless environment.
If you want to play PS4 with any Xbox controller (Especially Xbox Elite Series 2), THIS IS AN UNQUESTIONABLE CHOICE.
Features:
LED:
Lighting |
Status |
Blue LED Permanently on |
The connector and the device are currently connected. |
Blue LED Slow blinking (Once every two seconds) |
Wired device is not connected Wireless device is searching for connection… |
Blue LED Fast blinking |
Wireless connection mode is ON Searching for pairing device… |
Red LED Blinking |
Turbo-Remap button is being pressed |
Red LED Permanently on |
Entering Turbo-Remap Settings |
Connecting to the Device:
Insert Wingman XE into the PS4 console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful.
Wired Connection:
Connect the X360/X1 wired controller or game pad to Wingman XE through the USB port.
Using a X360 wireless controller:
Simply connect the X360 wireless receiver to the Wingman XE through the USB port.
Wireless Connection:
Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Wingman XE and the controller will be ready for use. When connecting, hold the LED buttons at the two sides of the Wingman XE for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Blue LED indicates that pairing is in progress.
Check whether the two Blue LEDs at the sides of the Wingman XE are permanently on. This indicates that the connection is completed.
Connection Pairing Supplementary Instructions:
Holding the LED buttons on the two sides of the Wingman XE for 1 second will activate wireless connection pairing mode. The Wingman XE will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:
* The connection pairing with the wireless controller is successful.
* The connection pairing is unsuccessful after 1 minute.
* The LED buttons are held for 1 second.
Wireless connection records between an Xbox One wireless controller (with Bluetooth function)/Xbox One Series 2 and the Wingman XE will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.
If Xbox One Elite Series 2 controller is used, please turn off controller profile settings to prevent interference with Wingman XE’s Turbo or Remap settings. As Xbox One Elite Series 1 controller is incapable of turning off profile settings, using Xbox One Elite Series 1 controller might result in Remap function overlapping.
Corresponding Buttons List for PS4, Xbox360 and XboxOne Game Pads:
PS4 Game Pad |
Xbox360 Game pad |
XboxOne Game pad |
D-Pad (U/D/L/R) |
||
Lx / Ly |
||
Rx / Ry |
||
╳ |
A |
A |
○ |
B |
B |
□ |
X |
X |
△ |
Y |
Y |
L1 |
LB |
LB |
R1 |
RB |
RB |
L2 |
LT |
LT |
R2 |
RT |
RT |
L3 |
LSB |
LSB |
R3 |
RSB |
RSB |
OPTIONS |
START |
MENU |
SHARE |
BACK+ START |
VIEW+ MENU |
PS Key |
Xbox Guide Key |
Xbox Guide Key |
TouchPad Key |
BACK |
VIEW |
Touch Pad Simulation Function:
Using the Xbox 360 controller:
BACK + R Stick can simulate the PS4’s Touchpad button.
BACK + START can simulate the PS4’s SHARE button.
Using the Xbox One controller:
VIEW + R Stick can simulate the PS4’s Touchpad button.
VIEW + MENU can simulate the PS4’s SHARE button.
Update for Touch Pad Simulation Function:
After firmware V1.1, this product support more of the following touchpad simulations:
Turbo and Remap Settings:
Turbo Function Settings
The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and XboxOne Game Pads
Turbo Function Settings
Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on.
Step 2.Choosing a FK button: (e.g. Setting A as turbo function)
Hold VIEW, then press A
Step 3.Completing Setting Mode:
Release all buttons, then press MENU to save settings.
Step 4.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.
Cancelling Turbo Function
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the RED LED of the Wingman XE will be permanently on.
Step 2.Erasing all Turbo function buttons
Press VIEW + MENU
Step 3.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.
Button Remap Settings
The following instructions are based on the Xbox One controller. For those using an Xbox 360 controller, please refer to the Corresponding Buttons List for PS4, Xbox360 and Xbox One Game Pads
Button Remap Settings
Buttons that can be remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on.
Step 2.Choosing a FK button: (e.g. Setting X as A+B)
Press X
Step 3.Choosing button to be set:
Hold VIEW, then press A + B.
Step 4.Completing setting mode:
Release all buttons, then press MENU to save settings.
Step 5.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.
Cancelling Button Remap Settings
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the RED LED of the Wingman XE will be permanently on.
Step 2.Erasing all settings for Button Remap Settings
Press VIEW + MENU.
Step 3.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman XE will be permanently on.
Notice:
*Each Wingman XE can only connect to a single Xbox 360 / Xbox One device. Wingman XE supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated irregularly.
*Wingman XE do not support headset/microphone function which provides by controller audio jack.