This AWUK translucent illuminated arcade button features a translucent clear body with a translucent coloured convex plunger and is available in a choice of colours. This button can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. This translucent arcade button with translucent colour plunger comes complete with fixing ring, spacer and bulb holder and mounts in a 24 mm to 28 mm mounting hole.
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
1 x Clear translucent arcade button with translucent coloured convex plunger
1 x Fixing Ring
1 x Spacer
1 x Bulb holder
* Translucent coloured convex plunger.
* Available to order with or with microswitch and LED
* Ideal for various commercial and academic projects.
* Lens cap can be removed to insert your own artwork or legend underneath.
* A range of compatible microswitches and LEDs are available to purchase separately.
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Total height of button: 44mm
This button requires crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
This button requires 6.3 mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables