Product Description
The AWUK RGB Colour Changing Illuminated Arcade Button is available in a choice of chrome effect white or translucent white finish. Each button comes complete with a fixing ring, bulb holder, spacer, choice of microswitch (4.8mm terminals) and 12V RGB colour changing LED. The RGB LED requires a 12V power source, which can be taken from a spare molex connector (Ground is black wire, 12V is yellow wire) on a PC power supply or a Jamma PSU. This button will fit in a 24mm to 28mm mounting hole. Once the LED is connected, it will cycle through red, green and blue illumination. This button is ideal for various commercial, academic or arcade projects.
Please view the product video below to see the illumination in action.
*Please Note:
This 12V RGB LED connects in the same way as a single colour LED and NOT as 3 seperate colour connections.
Intended Use - Suitability:
These RGB illuminated buttons are ideal for use when you just want to simply connect to a 12V power source and have them permanently changing colour from red to green to blue. This method does not require any extra hardware to have the colour changing illumination, so is a great way to save money, instead of having to buy the PAC64 or IPAC Ultimate PCBs. These single RGB LEDs can NOT be set up for fading or flashing sequences.
If your project requires fading or flashing sequences, please refer to our other RGB buttons and PacLED64 or I-PAC Ultimate, as these are more suitable for this purpose.
LED Connection:
To illuminate this RGB LED you will need a 12V power source. The 12V power can be taken from a spare molex connector on a PC power supply. The black wire is ground and the yellow wire is 12V.
What's included?
1 x White Arcade Button (Chrome Effect OR Translucent Finish)
1 x Fixing Ring
1 x Spacer
1 x 12V RGB Colour Changing LED
1 x Bulb Holder
Please Note:
This button is available to order as "Button only" (No microswitch) OR "With standard microswitch"
If you require alternative switches, these can be ordered separately.
Microswitch Option:
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Product Features:
* White Chrome Effect OR White Translucent Finish
* Colour Changing 12V RGB LED
* Choice Of Microswitches (4.8mm terminals)
* Cool Colour Changing Effect
* Low cost alternative for adding colour changing illumination to your project
Product Dimensions:
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Maximum depth of button from top of plunger to bottom of microswitch: 65mm
Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
1 Metre Long Crimped Wires
Daisy Chain Harness
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Does what it says on the tin.
At first the colours wouldn't change but that was because my voltage wasn't high enough. So when I got 12V running through it was fine. Just a note to other customers, if you buy multiple of these they do not start on the same colour or change colour in a synchronised fashion. Nice bright red, green and yellow though.