Translucent Illuminated Arcade Button
- Calculated at Checkout
This translucent illuminated arcade button features a translucent body and is available in a choice of colours. This button can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. Each translucent arcade button comes complete with fixing ring, spacer and bulb holder and mounts in a 24mm to 28mm mounting hole.
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
If selected, this button will be supplied with: Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
1 x Translucent Arcade Button
1 x Fixing Ring
1 x Spacer
1 x Bulb holder
* Ideal for various commercial and academic projects
* Lens cap can be removed to insert your own artwork or writing
* A range of compatible microswitches and LEDs are available to purchase separately
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Total height of button: 44mm
These buttons require crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3 mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables
The button is well made, looks great, has no visible seams on the ring. The button and ring are both lit by the LED. Bright enough, but not glaring. The Cherry microswitch was a really tight fit at first but after fitting has been really easy to take apart the few times that I needed to during assembly. Would recommend to anyone.
I've used these buttons as my main gameplay buttons. Make a nice sound and are well made and easy to wire up. I chose white for all all them and then separate coloured LEDS so that they would light up different colours once turned on.
I choose them for the front of my pincab, as function buttons, with led and standard switch.
I got the 5V versions of all colors, these are fantastic illuminated buttons with a great look with or without illuminations. Each of the buttons are different colors, and you'll get the corresponding LED color to match, each LED already has a resistor so there's no need to add one, and each LED draws approximately 20mA. The buttons are raised vertically with a black ring. You can print graphics, even on regular printer paper, and insert under the button lens but you'll get better results printing on translucent media.
Excellent quality and fast shipments.
For less than a pound fifty (at time of purchase), these are great value with the standard switches. I used a selection of these for my 'function' buttons - coins, start/select, tab/escape - and have not been disappointed.