Seimitsu PS-15 30mm Snap In Arcade button
Brand : Seimitsu Co.
- Calculated at Checkout
The Seimitsu PS-15 is a short 30mm snap-in style arcade button that has a non-clicking microswitch with 2.8mm terminals. This button has a shorter body (21mm) making it perfect for control panels that don't have much room underneath.
This button can be mounted in a material with a thickness from 1.2mm - 3mm.
Great buttons, but they don't fit very well with RAP4 Kai, they still twirl around after you've snapped them in and in over a year of playing almost every day the pins got bent (probably caused by the twirling), and one of the microswitches started to act up and not work or just hold itself down for a good second which messes around with your inputs. These buttons are still on another level compared to Sanwas, but I'll be ordering the PS-14-G's instead which i hope will fit in better.
I've used several of these buttons to replace cheap ones in old-skool hand-held joysticks, where there's not much depth inside the case. The response seems just as good as the regular-sized Seimitsu buttons.
You might also want these if you're trying to fit a Raspberry Pi inside your joystick case and the only place for it is directly under the buttons.
Unfortunately the plungers are not interchangeable with other button models, but at least there is a choice of matching or black rims. If you must have a different colour combination then I guess you just need to buy two!
Excellent buttons that were a perfect colour match for some 25 year old Seimitsu’s I already had. I highly recommend them to anyone