Seimitsu PS-14-GN 30mm Screw In Arcade Button
Brand : Seimitsu Co.
- Calculated at Checkout
The Seimitsu PS-14-GN arcade button is a screw in type, momentary arcade button that features a built-in microswitch with 2.8mm terminals and mounts in a 30mm mounting hole and can be mounted in material with a thickness of up to 9mm. Each PS-14-GN arcade button is supplied with a fixing ring, to secure the button firmly in place when mounted in a control panel or fight stick. Available in various colours, including the vibrant Keikou colours. Manufactured by Seimitsu Co in Japan, who are renowned for supplying high quality arcade parts - genuine Japanese Import.
* Various colours available
* Mounts in a 30mm mounting hole
* Mounts in material with a thickness of up to 9mm
* Perfect for fight stick modding
* Screw in type button
* Built-in microswitch with 2.8mm terminals.
This button requires 2.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO)
Pre-crimped 2.8mm wires and 2.8mm daisy chain ground harness can be ordered here:
Wires & Cables
I had Sanwa buttons before, but i felt like they were sometimes a little too responsive. So i bought these wonderful Seimitsu buttons and they're the best buttons i ever tried. They feel just like Sanwas when your fingers are resting on them, but are a little harder to activate. Just perfect for my taste!
simply the best buttons I have used so far
Perfect feel and robust. I screwed them into 12mm MDF and it's fine, even though the description says 9mm max.
These buttons are great! I originally bought one of those cheap kits from Amazon, but the buttons we're stiff and clicky. Felt really bad in my cabinet. Then I did a little research and landed on these buttons. They are perfect. They feel really nice to press. Not clicky at all, but still enough travel distance to feel nice. Only bad thing I can say is that they fit pretty loosely in a 30mm hole and are not long enough to use the threads in a 3/4 inch piece of particle board. Also, this store did not have enough inventory of the colors I wanted.
No feeling when press, i'm not satisfied unfortunately.
The clip in buttons on picade are prone to breaking and been slightly loose. These are screw in and secure but with same depth and connectors. Straight swap out.
Decent buttons, used a couple as the escape and enter buttons on the side of my pimoroni picade, replacing the standard ones. These look nicer (got the black and yellow ones) and are more obvious. Very easy to fit and work well too.
Smooth action and quite noticeable engagement, very nice to use, great quality overall and quiet thanks to the non clicky switches.
I've bought these buttons for my first custom case (with hitbox layout), and they do their job really well. The buttons are a tiny bit harder compared to the Sanwa buttons, but it doesn't affect your gameplay (I think this might be good for those, who like to rest their fingers on the buttons, because with these buttons, by doing that, you won't press the button incidentally).
An other good thing about these buttons is that there is a wide range of colors that you can choose from, so I'm pretty sure, that you will find a color that suits your case the most.
The delivery was quick (4 days from UK to Hungary), and there wasn't any problem with the package and the product.