The Seimitsu PS-14-DN-K are very similar to the PS-14-KN buttons. The plunger and surround on these buttons are translucent, are 27mm in diameter and come with a fixing ring to hold the button firmly in place when mounted in a control panel or fight stick.
These are the perfect button to use when modding a fight stick. The plunger can be disassembled and artwork can be placed under the lens cap. This button can be mounted in a material with a thickness up to 7mm with the included fixing ring and requires a 24mm mounting hole.
* Choice of colours available
* Mounts in a 24mm mounting hole
* Screw in type button
This button requires 2.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO)
Pre-crimped 2.8mm wires and 2.8mm daisy chain ground harness can be ordered here:
Wires & Cables
3 Reviews Hide Reviews Show Reviews
great delivery service except for the below
Seimitsu PS-14-DN-K 24mm Screw In Arcade Button Brand : Seimitsu Co.- needed by my Grandson to complete a project
Great overall button, what I did not understand is why the 24mm has a non transparent screw on ring, but that's ok :) Otherwise quality is top notch
heavy customizable buttons
Easy to open and modify. Useful both for old and new school games. Used in any kind of games.