Red 3/4 Inch (19mm) T-Molding
- Calculated at Checkout
Red 3/4 Inch T-Molding is sold in feet.
This T-Molding requires a 1/16" slot cutter.
How To Order:
Simply enter the number of feet you require.
For example: To order 20ft, simply enter quantity of 20.
T-Molding will always be cut and supplied in one continuous length, up to a maximum length of 250Ft (76 Metres). Any order over 250ft (76 metres) will be supplied in multiple rolls.
For example: 300ft would be supplied as 1 x 250ft roll & 1 x 50ft roll.
If you usually work in metres, please enter the amount you require below to convert this into feet.
*Please note: T-Molding can NOT be ordered in fractions.
E.g. 5m = 16.404ft - This would need to be rounded up to the nearest whole number.
What is T-Molding?
T-Molding is the plastic trim or edging that can be used to give a nice finish to a wide variety of products, including furniture, boats, arcade machines, slot machines, tables in VW camper vans and more. T-Molding is also commonly referred to as “plastic edging” “t trim” “plastic trim” or “t lining”
Is this T-Molding plastic and flexible?
Yes, this T-Molding is plastic and is very flexible. It can bend very easily to go round corners or edges of furniture or arcade machines.
Do you stock different colours and sizes?
Yes - We stock T-Molding in a wide variety of colours and sizes.
How do I install T-Molding?
To install T-Molding, you will need a slot cutter. Once you have cut the slot in your wood, you should be able to knock the T-Molding in with a soft faced hammer or rubber mallet. It is always advisable to practice cutting the correct slot size on an off cut of wood before you start your project to ensure a tight fit. If the slot has been cut at the correct depth, the T-Molding should be a nice tight fit, however a small bead of glue can also be used in the slot to ensure a more permanent fix.
Just the job
Was perfect for my stranger things cabinet it's a dull red not too in your face really flexible even better heated up slightly it's really finished off my cabinet
3 quarter inch T molding.
When I opened the package , I realized that this is not what I expected. I had removed the old T molding from an Arcade game from the 70ies and it was tough, hard and very unflexible and to my dread I saw that the tounge was way to narrow in comparison. This T mold was flexible , much thinner and had a wonderful red color :) I struggled a bit to figure out how to fixate it in the old tored up slot and succeeded. Im very pleased with the whole thing. Good package and delivery and the quality is perfect.
Red T Moulding
Nice colour and finish. Will set your cab off a treat. Would definitely buy again for other cabs
Very good quality and really easy to work with.
best place to shop for arcade parts..
great quility item as all ways from arcade world
High quality molding
Precisely manufactured. Great product.
The color of the moulding was a dull red. Soft and easy to use, cuts easily to mould around corners of the cabinet.