Product Description
Glossy Black (With Chrome Stripe) 3/4 Inch T-Molding is sold in feet.
Slot Cutter:
This T-Molding requires a 3/32" slot cutter
How To Order:
Simply enter the number of feet you require.
For example: To order 20ft, simply enter quantity of 20.
T-Molding will always be cut and supplied in one continuous length, up to a maximum length of 250Ft (76 Metres). Any order over 250ft (76 metres) will be supplied in multiple rolls.
For example: 300ft would be supplied as 1 x 250ft roll & 1 x 50ft roll.
T-Molding Conversion:
If you usually work in metres, please enter the amount you require below to convert this into feet.
*Please note: T-Molding can NOT be ordered in fractions.
E.g. 5m = 16.404ft - This would need to be rounded up to the nearest whole number.
Feet:
FAQ
What is T-Molding?
T-Molding is the plastic trim or edging that can be used to give a nice finish to a wide variety of products, including furniture, boats, arcade machines, slot machines, tables in VW camper vans and more. T-Molding is also commonly referred to as “plastic edging” “t trim” “plastic trim” or “t lining”
Is this T-Molding plastic and flexible?
Yes, this T-Molding is plastic and is very flexible. It can bend very easily to go round corners or edges of furniture or arcade machines.
Do you stock different colours and sizes?
Yes - We stock T-Molding in a wide variety of colours and sizes.
How do I install T-Molding?
To install T-Molding, you will need a slot cutter. Once you have cut the slot in your wood, you should be able to knock the T-Molding in with a soft faced hammer or rubber mallet. It is always advisable to practice cutting the correct slot size on an off cut of wood before you start your project to ensure a tight fit. If the slot has been cut at the correct depth, the T-Molding should be a nice tight fit, however a small bead of glue can also be used in the slot to ensure a more permanent fix.
Product Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
Nice T-molding, but needs wider slot
The T-molding it self is great looking, but since the feather on this molding is slightly wider than other 19mm (3/4") T-molding. You need at least a 2 mm slot cutter for this. If you have the right slot cutter for the job than nothing will stop you from making a realy nice cabinet:) Why this T-molding is different from the other colors, who knowes!
-
Andy's Arcade Review
Yes I have to agree it was a nightmare to install as this type of T-Moulding is slightly thicker and will not go into the slot . You will have to re Route the slot all over again but once done will go in Okay .So Guys be warned if you have put your side art on already choose a different T-Moulding ( Chrome is nice and easy to install) as you could damage your artwork trying to re route the slot.Having said all that, it does look good when its on.
-
WOW This stuff his tough to install
Having a nightmare installing this stuff, I am installing it to the U24 slim line cabinet with pre cut slots, however it just bends all the boards as its liker a compressed cardboard by the looks of it and just wont go in. It also come wound in a large circle and when unravelled is very hard to manage its just bent in all directions. Going to try and make the slot bigger and see if that helps. Once installed im sure itll l;ook greta but be warned you're in for an unhappy few hours installing it!!