CGA EGA YUV To 2 x VGA
- Condition:
- New
- Shipping:
- Calculated at Checkout
Description
The CGA/EGA/YUV to VGA converter board will allow all types of RGB, EGA, VGA or YUV component signals to be up-converted and displayed on a 31KHz PC VGA monitor, TFT monitor, LCD display or a HD-TV with VGA connection. All inputs are automatically detected meaning there are no dip switches to set to specify frequency.
This converter is the perfect for use with an existing CRT/LCD monitor in your arcade build or project.
Downloads:
CGA EGA YUV To 2 x VGA Manual
Specifications:
Supports CGA/EGA/VGA/YUV component signal input
Supports VGA output (640 x 480) (800 x 600) (1024 x 768) (1360 x 768)
CGA/EGA/VGA signal auto scan (15KHz) (24KHz) (31KHz)
YUV component signal auto scan (480i) (576i) (720i) (1080i) (480p) (576p) (720p) (1080p)
On screen display (English & Chinese)
Supports image position control and image zoom control
True digital 24-bit A/D converter for true 16.7million colour conversion
Supports all types of VGA monitors - CRT, PDP, LCD etc...
Input Power |
5VDC +/- 0.5v (2A) |
P7 or P9 |
||
Input signal |
CGA/EGA |
14.5kHz - 16.5kHz |
Auto scan |
P3 or P11 or P10 |
23.5kHz - 25.5kHz |
||||
30.5kHz - 32.5kHz |
||||
RGBHV |
30.5kHz - 32.5kHz |
Auto scan |
P10 or P11 |
|
VGA |
30.5kHz - 32.5kHz |
Auto scan |
P10 or P11 |
|
Ypbpr |
480p,576p,720p,1080p |
Auto scan |
P2 |
|
Ycbcr |
480i,576i,720i,1080i |
Auto scan |
P2 |
|
Output signal |
VGA |
640*480,800*600 |
P4 and P13 |
|
1024*768,1360*768 |
||||
User controls |
Input Switch, Image Zoom, Image Position, |
Menu Key |
||
Output Resolution ,R\G\B gain adjust. |
R\G\B VR |
Reviews
-
a good thing
I give 5 because it's a helpfull board. But you need to spend some time to get a good result. Adjust R, G and B, change to english, try different resolutions and adjust screen. Before the CRT in my After Burner Deluxe burns or explodes, it make a lot of scratching and ticking noise, I better use a 4:5 TFT and this nice converter.
-
Easy to use converter
This little guy was set up in no time after I followed the instructions how to change language :D
Wiring is very simple but you will need some solder skills.
I've tested a few PCB's with different frequencies and all worked.
Nice thing to have for testing purpose. -
Handy video signal converter
It does exactly what it should do but it jitters a little while it does it. It can be reduced a little through the menus but it's always there. If you're not sensitive to that kind of thing it'll be perfect for you.
Recommended. I'd like to give it 3.5 but I'll be generous and give it 4.