63mm Low Profile Illuminated Arcade Button With Diamond Effect Bezel
Brand : AWUK
- Calculated at Checkout
This low profile 63mm illuminated arcade button features a cool looking translucent, diamond effect bezel and can be used for various commercial and academic projects, including museum, exhibition, photo booth and interactive displays or for use in arcade machine projects. This low profile 63mm arcade button comes complete with fixing ring, spacer and bulb holder and mounts in a 24 mm to 28 mm mounting hole.
This button is available to order as "Button only" (No microswitch or LED included) OR "With standard microswitch & budget 12V LED included"
If you require alternative switches/LEDs, these can be ordered separately.
If selected, this button will be supplied with: White Budget 12V 10mm Wedge Base LED
If not selected, alternative wedge base LEDs can be ordered separately here: LEDs & Bulbs
If selected, this button will be supplied with: Chen Xiao Button Microswitch With 4.8mm Terminals
If not selected, alternative button microswitches can be ordered separately here: Microswitches
Adding your own artwork or text:
The lens on this button can easily be removed, should you wish to put your own artwork or text underneath the lens cap. These are normally referred to as “legends” and you can easily print your own legend on a PC printer and customise the button for your own requirements.
1 x 63mm Low Profile Arcade Button
1 x Fixing Ring
1 x Spacer
1 x Bulb holder
* Ideal for various commercial and academic projects
* Cool looking diamond design bezel
* Lens cap can be removed to insert your own artwork or writing
* A range of compatible microswitches and LEDs are available to purchase separately
Plunger Size: 50mm
Total Diameter Inc. Bezel: 63mm
Bezel Height: 4mm
Mounting Hole Required: 24mm To 28mm
This button requires crimped wires for microswitch connection (Microswitches sold separately)
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
This button requires 6.3mm crimped wires for connecting to the terminals on the bulb holder if you plan on using LEDs (LEDs sold separately).
1 wire for the positive connection and 1 wire for the negative connection
Pre-crimped wires and daisy chain ground harness can be ordered here:
Wires & Cables