4 Player Arcade Joysticks Buttons And I-PAC4 Wiring Kit No10
- Condition:
- New
- Shipping:
- Calculated at Checkout
During Checkout
Description
This 4 player arcade joysticks, buttons and wiring kit includes all the parts you will need to interface to a PC, Laptop or MAC, to create a 4 player arcade machine project. This is the perfect choice if you like games such as Gauntlet or The Simpsons! The joysticks in this arcade kit feature a 4cm long shaft, 2/4/8 way restrictor gate and come complete with ball top handles. These buttons have a translucent rim, built in microswitches with 2.8mm terminals and fixing rings are also included. The 1, 2, 3 & 4 player start buttons come complete with fixing rings and microswitches with 4.8mm terminals.
The I-PAC4 keyboard encoder included in this kit has 56 inputs, which is perfect for a 4 player set-up and comes complete with pre-crimped wires and 2 x daisy chain ground harnesses. The I-PAC4 has screw terminals on the board for easy connection and does not require any soldering - Simply connect the pre-crimped ends of the wires to the microswitches on the buttons/joysticks and then attach the bare ends to the screw terminals on the I-PAC4 board. The I-PAC4 board is detected by your PC as a keyboard and has a number of advanced features, should you require them.
Please see here for more information about the I PAC 4 Keyboard Encoder.
What's included in the kit?
4 x Zippyy Long Shaft Ball Top Arcade Joystick (Red) (2, 4 & 8 Way)
36 x Arcade Button With Translucent Rim
- 9 x Green, 9 x Yellow, 9 x Red, 9 x Blue
36 x Fixing Rings For Buttons
1 x White Classic Arcade Start Button - Concave - 1, 2, 3 & 4 Player set
4 x Chen Xiao Button Microswitch With 4.8mm Terminals (4.8mm Terminals)
1 x I-PAC 4 And Wiring Kit (4.8mm)
- 1 x I-PAC 4 Board
- 1 x USB Cable
- 56 x Crimped Wires With 4.8mm Crimps
- 2 x Daisy Chain Ground Harnesses With 4.8mm Crimps
- 1 x Pack Of 4 PCB Feet With Screws
Dimensions
Joysticks:
Mounting Plate Length: 9.8cm
Mounting Plate Width: 6.5cm
Height of Joystick Shaft: 4cm
Buttons:
Mounting hole required: 28mm
Overall Diameter of button across plunger: 36mm
Maximum depth of button from top of plunger to bottom of button: Approx 42mm
Player 1, 2, 3 & 4 Buttons:
Mounting hole required: 28mm
Overall Diameter of button across plunger: 32mm
Maximum depth of button from top of plunger to bottom of button: Approx 67mm