2 Player Arcade Joysticks Buttons And I-PAC2 Wiring Kit No9

This 2 player arcade joysticks, buttons and wiring kit includes all the parts you will need to interface to a PC, Laptop or MAC, to create a 2 player arcade machine project. The joysticks feature a 4cm long shaft, 2/4/8 way restrictor gate and come complete with ball top handles, which are available in a choice of colours. The buttons have built in microswitches with 2.8mm terminals and fixing rings are also included. The 1 & 2 player start buttons come complete with fixing rings and microswitches with 4.8mm terminals.

The I-PAC2 keyboard encoder included in this kit comes complete with pre-crimped wires and a daisy chain ground harness for easy connection. The I-PAC2 does not require any soldering - Simply connect the pre-crimped ends of the wires to the microswicthes on the buttons/joysticks and then attach the bare ends to the screw terminals on the I-PAC2 board. The I-PAC2 board is detected by your PC as a keyboard and has a number of advanced features, should you require them.

Please see here for more information about the I PAC 2 FS32 Keyboard Encoder.

Customers can choose the colour of the ball top joystick for this kit. 
(Ball top handles are available in Black, Blue, Green, Pink, Red, White or Yellow)

Customers can choose the colours of the buttons in this kit - Any combination.
(Buttons are available in Yellow, Pink, Blue or Green)

If no colour choices are made for either the joysticks or the buttons, you will be sent the default colours in the main picture.

What's included in the kit?
2 x Red Long Shaft Ball Top Joysticks (2, 4 & 8 Way)

11 x Blue Arcade Buttons With Built In Microswitch (2.8mm Terminals)
11 x Green Arcade Buttons With Built In Microswitch (2.8mm Terminals)
22 x Fixing Rings For Buttons

1 x 1 Player Start Button With Fixing Ring
1 x 2 Player Start Button With Fixing Ring
2 x Microswitches For Player 1 AND 2 START Buttons (4.8mm Terminals)

1 x I-PAC2 Keyboard Encoder
32 x Crimped Wires With 4.8mm Crimps
1 x Daisy Chain Ground Harness With 4.8mm Crimps
4 x PCB Feet With Screws

Dimensions
Joysticks:
Mounting Plate Length: 9.8cm
Mounting Plate Width: 6.5cm
Height of Joystick Shaft: 4cm

Buttons:
Mounting hole required: 28mm
Overall Diameter of button across plunger: 33mm
Maximum depth of button from top of plunger to bottom of button: Approx 42mm

Player 1 & 2 Buttons:
Mounting hole required: 28mm
Overall Diameter of button across plunger: 32mm
Maximum depth of button from top of plunger to bottom of button: Approx 67mm